Abstract:An organic/inorganic support of immobilizing catalysts for ethylene polymerization was devised. The composition of the hybrid catalyst is as following: styrene and acrylic copolymer (PSA) is the organic part for binding iron (III) acetylacetonate and his(imino) pyridyl ligand catalyst,and SiO2, (Davison 955 silical gel) is the inorganic part. The inorganic part is coated by the organic part (PSA) by sol-gel method. The catalyst could produce not only high crystallinity (72%) polyethylene,but also alpha-olefin. We considered the impact of different membrane materials and polymerization conditions (different cocatalyst, pressure, temperature, Al/Fe molar ratio) to the polymerization activity and properties of polymers and found that temperature had the greatest impact to the weight ratio of oligomer to PE. Because of the poor thermal stability of catalyst, the catalytic activity significantly attenuated with increasing temperature. When pressure increased, catalytic activity would increase too. The relationship of pressure and catalytic activity met the cossee catalytic reaction mechanism, which was widely accepted in Ziegler-Natta catalyst ' s ethylene polymerization mechanism. Different membrane materials would affect the final polyethylene product performance, the pure PSA as organic part would increase the molecular weight significantly. Cocatalysts affect not only the catalytic performance,but also the property of the final product. The alkylaluminium as cocatalyst tended to decrease the molecular weight. The iron catalyst system binding on the PSA after the treatment of magnesium chloride could produce the polyethylene of lower molecular weight (M-w = 11. 9 x 10(4)) and higher crystallinity (72%). And the polyethylene s melt index MI (2. 35 g/10min) was higher than the iron catalyst binding on other membrane materials. The polyethylene can be used as the low molecular weight part of bimodal polyethylene.

Copolymerization of Ethylene and in Situ‐generated Α‐olefins to High‐performance Linear Low‐density Polyethylene with a Two‐catalyst System Supported on Mesoporous Molecular Sieves

Advance in preparation of linear low density polyethylene by tandem catalysis system

Engineering Ethylene/1-Hexene Copolymers from Ethylene Stock with a Model-Guided Catalyst Feeding Policy

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene-1-Hexene Copolymer

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Ethylene polymerization with metallocene/late transition metal combined catalysts

Preparation of functional ethoxysilane-containing polyethylene through ethylene coordination copolymerization catalyzed by iminopyrrolide vanadium complex

ETHYLENE POLYMERIZATIONS CATALYZED BY Α-Diimine COMPLEXES WITH DIFFERENT SUBSTITUENTS ON LIGAND BACKBONE

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Ethylene Polymerization with Hybrid Nickel Diimine/cp2ticl2 Catalyst: a New Method to Prepare Blends of Linear and Branched Polyethylene

Combination of 8‐aminoquinoline Nickel Dichloride and Cp2ZrCl2 Catalysts for Ethylene Polymerization

Ethylene polymerization with iron-based diimine catalyst supported on MCM-41

Organic/Inorganic Support for Immobilizing Iron (iii) Acetylacetonate and Bis(Imino)Pyridyl Ligand Catalyst System for Ethylene Polymerization

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

A Novel Catalytic System of [O,O] Bidentate Titanium Complexes and Et2AlCl/Bu2Mg for the Production of Ultra‐High Molecular Weight Polyethylene

Ethylene polymerization using a novel MgCl2/SiO2-supported Ziegler–Natta catalyst

Judicious Reduction of Supported Ti Catalyst Enables Access to Disentangled Ultrahigh Molecular Weight Polyethylene