Abstract:The Ba1-x La x Ti0.9Sn0.1O3 ceramics (x = 0, 0.006, 0.007, 0.008) were prepared by the traditional solid-state reaction method. The influence of La3+ on the phase, dielectric properties, ferroelectric properties, and electrocaloric effect (ECE) was analyzed in detail. The results of refinement show that all ceramics are multiphase coexistence at room temperature, including the cubic phase, the tetragonal phase, and the orthogonal phase. With the increase of La3+, the polar phases decrease but the non-polar phase increases, which is the main reason for the decline in adiabatic temperature change (ΔT). The analysis of dielectric properties and ferroelectric properties demonstrate that the diffuse phase transition is strengthened by introducing La3+. It also means that polar nanoregions (PNRs) might be formed. Therefore, the temperature stability of the Ba1-x La x Ti0.9Sn0.1O3 ceramics in a wide temperature range near room temperature is improved. Simultaneously, the PNRs provide additional entropy to improve ECE. A higher ΔT = 0.88 K is obtained under 60 kV/cm for x = 0.007, which also possesses excellent temperature stability in the temperature range of 298 K–378 K. The doping of La3+ also improves the electric field threshold of the electrocaloric strength (ΔT max /ΔE) and stabilizes the ΔT max /ΔE under a higher electric field, which is conducive to improving ECE under a higher electric field and providing another possible solution for promoting the practical application of ECE.

Temperature Dependence of Electrical Properties of Lead Lanthanum Zirconate Stannate Titanate Ceramics

INVESTIGATION OF ELECTRIC FIELD-INDUCED ANTIFERROELECTRIC TO FERROELECTRIC PHASE TRANSITION AND PHASE STABILITY OF PLZST CERAMICS

Phase Stability and Ferroelectric Properties of Lead Strontium Zirconate Titanate Ceramics

Effect of composition and temperature on field-induced properties in the lead strontium zirconate titanate system

Lead-free Piezoceramics with Giant Strain in the System Bi0.5Na0.5TiO3–BaTiO3–K0.5Na0.5NbO3. II. Temperature Dependent Properties

Temperature-Dependent Electrical Properties of 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub>Ceramics

Temperature-Dependent Electrical Properties Of 0.94bi(0.5)Na(0.5)Tio(3)-0.06batio(3) Ceramics

Electric Field‐Induced Phase Transition Behaviors, Thermal Depolarization, and Enhanced Pyroelectric Properties of (pb0.97la0.02)(zrxsn0.89−xti0.11)o3 Ceramics

Reversible and High-Temperature-Stabilized Strain in (Pb,La)(Zr,Sn,Ti)O3 Antiferroelectric Ceramics

Elastic Anomalies Near Phase Transitions of Lead-Free （na,bi）tio3 and （ba,zr）tio3 Ferroelectric Ceramics

Effect of A-site La3+ Modified on Dielectric and Energy Storage Properties in Lead Zironate Stannate Titanate Ceramics

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Effect of Zr:Sn ratio in the lead lanthanum zirconate stannate titanate ceramics on microstructure and electric properties

The electrocaloric effect of Ba1-La Ti0.9Sn0.1O3 ceramics with excellent temperature stability near room temperature

Evolving energy-storage performances during temperature-induced antiferroelectric P–R phase transition in NaNbO3-based lead-free ceramics

High-Temperature Ferroelectric Phase Transition Observed in Multiferroic Bi0.91la0.05tb0.04feo3

Large Strain of Lead-Free Bismuth Ferrite Ternary Ceramics at Elevated Temperature

Temperature Independence of Piezoelectric Properties for High-Performance BiFeO3–BaTiO3 Lead-Free Piezoelectric Ceramics Up to 300 °C

Electrical and Ferroelectric Properties of Strontium Doped Lead-Free BCZT Ceramics

Temperature-dependent electrical properties of 0.5Pb(Ni 1/3 Nb 2/3 )O 3 –(0.5 − x )PbTiO 3 – x PbZrO 3 piezoceramics near the morphotropic phase boundary

NaNbO3 modulated phase transition behavior and antiferroelectric stability evolution in 0.88(Bi0.5Na0.5)TiO3-0.12BaTiO3 lead-free ceramics