Abstract:This contribution focuses on the use of modified Rayleigh law as a technique for determining the intrinsic and extrinsic (reversible/irreversible) contributions to the piezoelectric effect up to 150 °C across a broad compositional space, augmenting previous understanding of the BiFeO3-(K0.5Bi0.5)TiO3-PbTiO3 system. At room temperature, a mechanistic explanation of the correlation between crystal symmetry, i.e., tetragonal spontaneous strain, xs, and the Rayleigh relations using Landau theory is provided. The intrinsic response was found to be heavily dependent upon the tetragonal xs, whereby an optimisation between polarization and permittivity was elucidated, leading to enhanced piezoelectric charge coefficients. A c/a ratio of ∼1.041 was identified at which the room temperature intrinsic and extrinsic effects were at a maximum; a dinit of 183 × 10−12 m/V and Rayleigh coefficient of 59 × 10−18 m2/V2 were measured, resulting in the largest piezoelectric charge coefficients. The piezoelectric charge coefficient d33, intrinsic and extrinsic contributions of these materials were all found to increase up to 150 °C while adhering to the Rayleigh model. The reversible extrinsic component of the total reversible response, dinit, was calculated to be relatively minor, 4.9% at room temperature, increasing to 12.1% at 150 °C, signifying its increasing influence to the piezoelectric effect, as domain wall motion is thermally activated. Hence, the phenomenological interpretation provided here may be used as a roadmap to elucidate the origins of the temperature dependence of the piezoelectric effect.

Temperature Independence of Piezoelectric Properties for High-Performance BiFeO3–BaTiO3 Lead-Free Piezoelectric Ceramics Up to 300 °C

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Large electric‐field‐induced strain and enhanced piezoelectric constant in CuO‐modified BiFeO3‐BaTiO3 ceramics

Lead-Free BiFeO3-BaTiO3 Ceramics with High Curie Temperature: Fine Compositional Tuning Across the Phase Boundary for High Piezoelectric Charge and Strain Coefficients.

Enhanced Electric Field-Induced Strain Properties in Lead-Free BF-BT-Based Piezoceramics by Local Structure Inhomogeneity

Excellent Thermal Stability and Enhanced Piezoelectric Performance of Bi(Ni2/3Nb1/3)O3-modified BiFeO3-BaTiO3 Ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Temperature Dependence of the Intrinsic and Extrinsic Contributions in BiFeO3-(K0.5Bi0.5)TiO3-PbTiO3 Piezoelectric Ceramics

Superior Piezoelectric Performance with High Operating Temperature in Bismuth Ferrite-Based Ternary Ceramics

Temperature Dependences of the Ferroelectric and Dielectric Properties of High Curie Temperature PbTiO3–BiScO3–Bi(Zn1/2Zr1/2)O3

Piezoelectric Properties of BiFeO3 Exposed to High Temperatures

Temperature Dependent, Large Electromechanical Strain in Nd-Doped Bifeo3-Batio3 Lead-Free Ceramics

Ultrahigh Piezoelectric Response Obtained by Artificially Generating a Large Internal Bias Field in BiFeO3–BaTiO3 Lead‐Free Ceramics

Superior high-temperature piezoelectric performances in BF-PT-BT ceramics via electric field constructed phase boundary

Enhanced Piezoelectricity and Thermal Stability of Electrostrain Performance in BiFeO3-Based Lead-Free Ceramics

Large strain and temperature-insensitive piezoelectric effect in high-temperature piezoelectric ceramics

Achieving both large piezoelectric constant and high Curie temperature in BiFeO3-PbTiO3-BaTiO3 solid solution

High Temperature 0.63Bifeo3-0.37Batio3 Based Ceramics with Large Electromechanical Properties by Simple A-site K+ Doping

Temperature Dependent Piezoelectric Properties of Lead-Free (1-X)k0.6na0.4nbo3–xbifeo3 Ceramics

High piezoelectric performance and resistivity through a laminated structure design for BiFeO3–BaTiO3 ceramic

Achieving High Curie Temperature and Prominent Piezoelectric Response Via Synergistic Effect of Site Engineering for Bifeo3-Batio3 Ceramics