Abstract:The Al63Cu25Fe9Cr3 quasicrystalline was prepared by conventional casting method. The microstructures and phase composition of Al63Cu25Fe12 quasi-crystalline and Al65Cu20Fe10Cr5 phases were characterized by XRD and SEM. Aluminium based composites was fabricated by using the Al63Cu25Fe9Cr3 quasicrystalline particles as the reinforcing phase and ZL101 as matrix with mechanical stirring. The effects of quasicrystals content, on the microstructure and mechanical properties of the obtained composite, were investigated. The results show that the as-cast quasicrystalline material is composed of d-phase(Al65Cu20Fe10Cr5), I-phase(Al63Cu25Fe12), lambda-Al3Fe, beta-AlFe3 and a small amount of eta-AlCu, theta-Al2Cu phases. After heat treatment, the quasicrystalline intermediate alloy composition tends to quasicrystal phase. In the composite material, the diffusion between the quasicrystalline and the matrix alloy caused the decomposition of the structure of quasicrystalline phase. With the increase of quasicrystalline content, the tensile strength of the composites increases. However, addition of the Cr element changes the acicular beta-Fe(Al80-85Fe6-9Si10-15) phase into a manlike or bone-like alpha-Fe(Al80-85Fe4-8Si6-8Cr3-5) phase which increases the elongation of the composite. The best comprehensive mechanical properties corresponded to the 7 wt% quasicrystalline particles. Strengthening mechanism of quasicrystal reinforced aluminum matrix composites, a model that model considers the dislocation strengthening mechanism and the effect of load transfers mechanism on the tensile strength of composites. This theory calculates the tensile strength of quasicrystalline reinforced aluminum matrix composites and verifies the effectiveness of the model through experiments.

Microstructure and properties of Mg-based quasicystal particulate reinforced composite

Microstructure and Mechanical Properties of Squeeze Casting Quasicrystal Reinforced AZ91D Magnesium Matrix Composites

Characterization of Aluminium Matrix Compositesreinforced by Al–Cu–Fe-Cr Quasicrystalline Particles

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and mechanical properties of an aluminum alloy reinforced by Al–Ni–Co–Mn quasi-crystalline

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Quasicrystal-reinforced Mg alloys

Effect of Ca Concentration on Microstructure and Mechanical Properties of As-Cast and As-Extruded Quasicrystal-Strengthened Mg-7.2Zn-2.4Gd Alloy

Investigating the microstructure-property relationship in Mg matrix composites reinforced by particles of different sizes using experiments combined with finite element simulation

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Magnesium Matrix Nanocomposites Fabricated by Ultrasonic Assisted Casting

Interfacial microstructure, mechanical properties and strengthening mechanism of Mg/Al bimetallic composites produced by a novel compound casting with the addition of Gd

Microstructure and mechanical properties of steel wire reinforced Mg matrix composites fabricated by composite extrusion

Microstructure and phase transformation of as-cast and annealed Mg–4Zn–1Y alloy containing quasi-crystal phase

Microstructure of as-cast Mg-4.2Zn-0.8Y (at.%) alloys containing Gd

Microstructural evolution and age-hardening behavior of quasicrystal-reinforced Mg–Dy–Zn alloy

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation