Abstract:Good structural performance and reliability are two key objectives in design of wind turbine blade. To improve the natural frequency of blades to avoid resonance effectively, but it also increases the weight and direct manufacturing cost of blades. To achieve the best trade-off between mass and first-order frequency of blades, this paper presents a method of structural optimization based on multi-objective genetic algorithm NSGA-II. A small wind turbine blade is taken as case study. The CFD computation is performed to obtain the aerodynamic load, and the FEM is applied to obtain structure responses. With the weight minimization and the first-order frequency maximization of the blade as two goals, the optimization model is constructed and the Pareto solution set of two goals is obtained. Compared with original scheme, the weight of the optimized blade is reduced by about 15%. On the premise of avoiding blade resonance, the solution with the weight as light as possible is selected as the design scheme. The delamination failure, buckling failure, strength failure, and other failure modes of the blade with thin airfoil are analyzed, and the results show that the delamination failure and buckling failure of the blade can be ignored temporarily. Time-varying wind speed and some mechanical parameters of composite materials are taken as random input variables. The reliabilities of the design scheme with multiple failure modes are evaluated, and the reliability sensitivity is analyzed by combining FEM, BP neural network method and Monte Carlo Simulation (MCS) method. The results show that wind speed and longitudinal elastic modulus of uniaxial fiberglass are critical influence factors for affecting reliabilities of the blade. Meanwhile, the results can also provide some references about the timing of shutting down wind turbines and the selection of composite materials.

Structural Analysis of Large-scale Composite Wind Turbine Blade Based on ANSYS

Design optimization of composite wind turbine blades considering tortuous lightning strike and non-proportional multi-axial fatigue damage

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Strength Evaluation of the Composite Propeller under Hydrodynamic Fluid Load

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Finite Element Analysis for Composite Blade Structure of Large Wind Turbine

Design and structural responses of a 38-meter sectional wind turbine blade under extreme static loads

A Study on the Structural Characteristics of the Blades of Wind Turbines under Static Load Condition

Structural analysis of offshore wind turbine blades using finite element method

A Scaled Numerical Simulation Model for Structural Analysis of Large Wind Turbine Blade

Structural Optimization and Influence Factors on Reliability for Composite Wind Turbine Blade

Numerical Modeling and Analysis of a Horizontal Axis RM1 NACA-4415 Wind Turbine

Improving a Composite Wind Turbine Blade Considering Minimizing the Prospect of Flutter with the Method of Modal Analysis Technique

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Aerodynamic Design and Modal Analysis on Wind Turbine Blade Based on CAD/CAE

Finite Element Analysis of Composite Offshore Wind Turbine Blades Under Operating Conditions

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

A Numerical Method for the Dynamics Analysis of Blade Fracture Faults in Wind Turbines Using Geometrically Exact Beam Theory and Its Validation

Progressive Failure Analysis for 5MW-Class Wind Turbine Composite Blades with Debonding Damage based on CZM Method

Aerodynamic and structural analysis for blades of a 15MW floating offshore wind turbine

Dimensional reduction analyzing the thermoelastic behavior of wind turbine blades based on the variational asymptotic multiscale method