Preparation of the Adsorbent from Hybrid Chemical and Biological Sludges and Effect of Its Reuse in Wastewater Treatment

PAN Zhi-hui,LIANG Heng,TIAN Jia-yu,CHEN Zhong-lin,LI Gui-bai
2010-01-01
Abstract:Using the hybrid chemical and biological sludges as raw material,the adsorbent was prepared by chemically activating with 18. 0 mol/L H2SO4 in the mass ratio of 1∶ 3,and thereafter pyrolyzing at 550 ℃ for 1 h. The physical and chemical characteristics of the hybrid sludge-derived adsorbent were examined in terms of the surface physical morphology,the specific surface area and pore structure,the aluminum and iron contents, and element composition. Furthermore,the adsorption effect of the adsorbent for organic substances in wastewater was also investigated. The results indicated that the adsorption capacity of the sludge-derived adsorbent for UV254 was lower than that of a commercial activated carbon (AC),while its capacity of adsorbing COD was higher than that of the commercial AC. Further study showed that the sludge-originated adsorbent could reduce the polymeric ferric aluminous chloride (PFAC) dosage when it was reused in chemically enhanced primary treatment. With the simultaneous dosing of 15 mg/L of PFAC and 0. 3 g/L of the adsorbent,the removal efficiencies of UV254 and COD reached to 26. 1% and 61. 6%,respectively. The coagulant dosage could be reduced to about 50% through the addition of the adsorbent to achieve similar removal efficiencies of UV254 and COD.
What problem does this paper attempt to address?