Characteristics of Adsorbents Made from Biological, Chemical and Hybrid Sludges and Their Effect on Organics Removal in Wastewater Treatment

Zhi-hui Pan,Jia-yu Tian,Guo-ren Xu,Jun-jing Li,Gui-bai Li
DOI: https://doi.org/10.1016/j.watres.2010.09.008
IF: 12.8
2011-01-01
Water Research
Abstract:Meso-macropore adsorbents were prepared from biological sludge, chemical sludge and hybrid sludge of biological and chemical sludges, by chemically activating with 18.0 M H(2)SO(4) in the mass ratio of 1:3, and then pyrolyzing at 550 °C for 1 h in anoxic atmosphere. The physical and chemical characteristics of the sludge-based adsorbents were examined in terms of surface physical morphology, specific surface area and pore size distribution, aluminum and iron contents, surface functional groups and crystal structure. Furthermore, the adsorption effect of these adsorbents on the organic substances in wastewater was also investigated. The results indicated that the adsorption capacities of the sludge-based adsorbents for UV(254) were lower than that of commercial activated carbon (AC), whereas the adsorption capacities of the adsorbents prepared from hybrid sludge (HA) and chemical sludge (CA) for soluble COD(Cr) (SCOD(Cr)) were comparable or even higher than that of the commercial AC. The reasons might be that the HA and CA possessed well-developed mesopore and macropore structure, as well as abundant acidic surface functional groups. However, the lowest adsorption efficiency was observed for the biological sludge-based adsorbent, which might be due to the lowest metal content and overabundance of surface acidic functional groups in this adsorbent.
What problem does this paper attempt to address?