Abstract:Miniaturized microwave cavities constructed by the parallel-plate waveguide (PPW) becomes one of the main propagation pathways of the radio-frequency interference (RFI) in 3-D integrated circuits. It is still challenging to suppress RFI in the practical cavities, where the space is extremely constrained. In this work, the working mechanism and design method of the noise suppression sheet (NSS) is quantitatively studied, serving as an efficient approach to suppress RFI within an electrically small size in these microwave cavities. The analysis is based on the dispersion relationship derivation of the NSS-loaded PPW structure. Both the derived formulas and the numerical study reveal that the imaginary part of the permeability, that is, $\mu _{i}$ , of the NSS plays a key role in increasing the reflection and attenuation loss, and thus obtaining a high RFI suppression level. Further study indicates even when the NSS’s profile is lower than 10% of the cavity’s height and the length is lower than $0.1\lambda _{0}$ , its suppression level up to 10 dB can be well accomplished, which is deemed difficult to achieve by using conventional methods. Moreover, this method is, respectively, applied in three practical engineering scenarios for the RFI suppression, that is, heatsink package above a chip, power distributed network (PDN), and flexible circuit. Good agreement is observed between the measurement results and the simulated ones, which confirmed the efficacy of our quantitatively developed NSS. The proposed method is promising for broad industrial applications, such as tiny chip packages, multi-channel systems, and flexible electronics.

An Advanced Monolithic Digitalized Random Carrier Frequency Spread-Spectrum Clock Generator for Emi Suppression

A New On-chip Signal Generator for Charge-Based Capacitance Measurement Circuit

A 92 Fsrms Jitter Frequency Synthesizer Based on a Multicore Class-C Voltage-Controlled Oscillator with Digital Automatic Amplitude Control

2.5 Mw 2.73 GHz Non-Overlapping Multi-Phase Clock Generator with Duty-Cycle Correction in 0.13 Μm CMOS

Novel LC resonant clocking for 3D IC using TSV-inductor and capacitor

A 2.4 mW 2.5 GHz multi-phase clock generator with duty cycle imbalance correction in 0.13 µm CMOS

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A Programmable Spread Spectrum Clock Generation

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A Spread Spectrum Clock Generator with a Wide Frequency and Attenuation Tuning Range Based on a Third-Order Error-Feedback Delta-Sigma Modulator

A Spread-Spectrum Clock Generator with FIR-embedded Binary Phase Detection and 1-Bit High-Order ΔΣ Modulation.

Design of Area-Efficient GHz Range Current Mode Frequency Synthesizer Using Standard CMOS Technology

A Novel Frequency Selective Surface Applied for EMI Suppression in Integrated Circuit Package

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Electromagnetic Radiation Suppression of Package Lid Based on CSRR and Interdigital Structure

Ultrathin, Electrically Small Noise Suppression Sheet for Microwave Cavities of 3-D Integrated Circuits: Design Methodology and Realization

Clock Generator and OOK Modulator for RFID Application

Space Spread-Spectrum Strategy for MMC to Reduce the Conducted EMI

A 3∼5-GHz low-phase-noise fractional-N frequency synthesizer with AFC for GSM/PCS/DCS/WCDMA tranceivers

A 3 to 5 Ghz Low-Phase-Noise Fractional-N Frequency Synthesizer with Adaptive Frequency Calibration for Gsm/Pcs/Dcs/Wcdma Transceivers

A 5 GHz CMOS frequency synthesizer with novel phase-switching prescaler and high-<i>Q</i>LC-VCO