Abstract:In a design study of the large-sized sodium-cooled fast reactors in Japan (JSFR), one key issue to establish an economically superior design is suppression of a gas entrainment (GE) phenomenon at a free surface in the reactor vessel. However, the GE phenomenon is highly non-linear and too difficult to be evaluated theoretically. Therefore, we are developing a high-precision CFD method to evaluate the GE phenomenon accurately. The CFD method is formulated on an unstructured mesh to establish an accurate modeling for a complicated shape of the JSFR system. As a two-phase flow simulation method, a high-precision volume-of-fluid algorithm is employed in the CFD method. In addition, physically appropriate formulations at gas-liquid interfaces are introduced into the CFD method. The developed CFD method is already applied to the simulation of a GE phenomenon in a basic GE experiment and the simulation results show good agreement with experimental results. Therefore, it is confirmed that the proposed CFD method can reproduce a GE phenomenon. However, for the simulation of the GE phenomenon in the JSFR, we still have one problem on a mesh subdivision. Though a fine mesh subdivision has to be applied to the regions where the GE occurs, it is difficult to preliminarily know the regions because the GE occurrence is strongly affected by a local instant flow pattern, i.e. a vortex generation. Therefore, an adaptive mesh technique is necessary to apply a fine mesh subdivision automatically to only the local GE occurrence regions in the large-sized JSFR. In this study, as one part of an adaptive mesh development, a two-dimensional unstructured adaptive mesh technique is developed and verified. In the proposed two-dimensional adaptive mesh technique, each cell is isotropically subdivided to reduce distortions of the mesh. In addition, a connection cell is formed to eliminate the edge incompatibility between a refined and a non-refined cells. A connection cell has several subdivision patterns and one of them is selected to be compatible with adjacent cells on every cell edge. Finally, the present unstructured adaptive mesh technique is verified by solving well-known driven cavity problem. As the result, the present unstructured adaptive mesh technique succeeds in providing a high-precision solution, although we employ a poor-quality distorted mesh at the initial state. In addition, the simulation error on the unstructured adaptive mesh at the steady state is much less than the error on the structured mesh consisting of a larger number of cells.

Development and Application of A Structured/Unstructured Combined Mesh Scheme for Global Modeling of A Directional Solidification Process of Silicon

Numerical Simulation of Directional Solidification Process for the Polycrystalline Silicon Ingot

Influence of Crystal Growth Rate on the Thermal Field in a Directional Solidification Process for Silicon Solar Cells

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Application of Multi Heaters in a Directional Solidification Furnace for Silicon Solar Cells

Development And Verification Of Unstructured Adaptive Mesh Technique With Edge Compatibility

Modeling and improvement of silicon ingot directional solidification for industrial production systems

Heat and Impurity Transfer Mechanisms of Czochralski and Directional Solidification Processes

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation During Directional Solidification

Effects of argon flow on heat transfer in a directional solidification process for silicon solar cells

Role of marangoni tension effects on the melt convection in directional solidification process for multi-crystalline silicon ingots

Effects of argon flow on melt convection and interface shape in a directional solidification process for an industrial-size solar silicon ingot

In situ observation and numerical analysis of temperature gradient effects on growth velocity during directional solidification of silicon

Numerical analysis of thermohydraulic behavior in a directional solidification furnace

Effect of melt flow on impurity distribution in directional solidification of silicon solar cells

Global Simulation of Coupled Oxygen and Carbon Transport in an Industrial Directional Solidification Furnace for Crystalline Silicon Ingots: Effect of Crucible Cover Coating

System design and hot zone optimization of monocrystalline silicon directional solidification furnace for PV application

Microstructural Evolution Mechanism of Semi-Solid Slurry: a Study Using Phase-Field-Lattice-Boltzmann Scheme

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Thermal system design and optimization of an industrial silicon directional solidification system

Experimental Study Of 3d Solid-Liquid Interfaces And Their Influence On Directional Solidification Silicon Ingot