Abstract:In this work, we propose a novel sensor based on two parallel Fabry-Pérot interferometers (FPIs) and the Vernier effect, achieving temperature and pressure sensing. Both FPIs utilize the end face of a single-mode fiber as the reflective surface. FPI 1 is composed of a single-mode fiber and a thin-core fiber fusion spliced together, with the cavity filled with polydimethylsiloxane (PDMS); FPI 2 is made of two segments of single-mode fiber with the cavity filled with ultraviolet (UV) glue. Within the temperature range of 28–40 °C, the temperature sensitivities of FPI 1 and FPI 2 are −0.40 nm/°C and 0.49 nm/°C, respectively, indicating that the reflection spectra of the two sensors shift in opposite directions as the temperature increases. When the two sensors are connected using a 3 dB coupler and both are employed for temperature sensing, enhanced Vernier effect is achieved, resulting in a sensitivity of −3.38 nm/°C. This represents an 8.45-fold and 6.89-fold increase in sensitivity compared to FPI 1 and FPI 2 , respectively. Additionally, FPI 2 exhibits sensitivity to pressure; in the range of 0.1–0.7 MPa, the sensitivity of FPI 2 reaches 2.73 nm/MPa. When using FPI 1 as a reference device and FPI 2 as a sensing device, the sensitivity within the same range reaches 20.91 nm/MPa, a 7.65-fold increase compared to FPI 2 alone.

Temperature-independent high pressure sensor based on tapered FBG

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Pressure Sensor Based on a Free Elastic Cylinder and Birefringence Effect on an FBG with Temperature-Compensation

A Novel High-Sensitivity Fiber Grating Sensor for Simultaneous Measurement of Temperature and Pressure

A diaphragm-type fiber Bragg grating pressure sensor with temperature compensation

Temperature-Compensated High Pressure Fbg Sensor with A Bulk-Modulus and Self-Demodulation Method

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

A Practical FBG Sensor Based on a Thin-Walled Cylinder for Hydraulic Pressure Measurement

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

A Practical FBG Pressure Sensor Based on Diaphragm-Cantilever

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring

Hollow Core Bragg Fiber Integrated With Regenerate Fiber Bragg Grating for Simultaneous High Temperature and gas Pressure Sensing

Multi-parameter sensor based on cascaded multicore FBGs and an FPI for bending, temperature and pressure measurements

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

High-sensitivity fiber temperature and pressure sensor based on fabry-perot interferometry and Vernier effect

Temperature and Lateral Pressure Sensing Using a Sagnac Sensor Based on Cascaded Tilted Grating and Polarization-Maintaining Fibers