Abstract:This paper is focused on a dual-loop current control method (grid current loop and fundamental current loop) for digitally controlled LCL-type shunt active power filters (APFs). Normally, a proportional-resonant (PR) unit is used as the fundamental current controller, where the proportional part of PR unit actually serves as the proportional feedback of inverter-side current and provides a certain degree of damping for LCL resonance. However, its valid damping region is only up to one-sixth of the sampling frequency (fs/6), which leads to less robustness to the grid impedance. To address this issue, a delay-compensation control link is proposed in this paper to replace the proportional part of the PR fundamental current controller and widen the effective damping region. As a result, the system robustness is improved without adding extra sensors or introducing an extra active damping loop. Theoretical analysis proves that it can obtain a wider damping region of (0, fs/4). Moreover, a systematic controller parameter design criterion is studied. In particular, a numerical optimization algorithm is developed to optimize damping property, and a design method based on root locus plot and Bode diagram is presented to enhance harmonic compensation accuracy. Finally, experimental results implemented on a 30 kVA APF prototype have validated the feasibility of the proposed current controller and parameter design criterion.

Double-closed-loop Fuzzy Controlled Active Power Filter

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

A Current Control Method for LCL Active Power Filters Based on the Reduced Order Generalized Integrator

A simple method of realization of low power loss and high compensation-precision active power filter

Research on PI and Repetitive Control Strategy for Shunt Active Power Filter with LCL-filter

High-Performance Resonant Controller For Active Power Filter With Selective Harmonic Compensation

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

High precision compensation for high power Hybrid Active Power Filter based on repetitive control algorithm

An Enhanced Active Damping Control Method for <i>LCL</i>-Type Shunt APFs with Proportional-Resonant-Differential Inverter-Side Current Feedback

Design and implementation of compound current control strategy for improved LCL-based Shunt Active Power Filter

A Double-Loop Current Control Strategy for Shunt Active Power Filter with Lcl Filter

A Novel Control Approach for LCL-based Shunt Active Power Filter with High Dynamic and Steady-State Performance

Design of the Repetitive Control Method for Active Power Filter

Current Loop Control Approach for LCL-based Shunt Active Power Filter

Robust Predictive Dual-Loop Control Method Based on Lyapunov Function Stability and Energy Equilibrium Though Double-Core Processors for Active Power Filter

A Novel Active Damping Method for LCL-filter-based Shunt Active Power Filter

Robust Active Damping Control for LCL-Type Shunt Active Power Filters

Design of DC-bus voltage controller for HAPF using low-pass filter

Fuzzy Control and Lyapunov-based Stability Control of the Three-phase Shunt Active Power Filter

Control Strategy for Shunt Active Power Filters with High Compensation Precision

A Dual-Current-loop Control Method Based on System Current Detection for LCL-filter-based Active Power Filters