Abstract:The Vibrant Soundbridge (R) (VSB) active middle-ear implant provides an effective treatment for mild-to severe sensorineural hearing loss in the case of normal middle ear anatomy and mixed hearing loss in middle ear malformation. The VSB floating mass transducer (FMT), with proper couplers, can be installed on various structures of the ossicular chain, e.g., the short and long process of the incus, the stapes head, and the stapes footplate. A long process (LP) coupler is most commonly used for FMT attachment to the long process of the incus with intact ossicular chain, while CliP and Bell couplers are two standardized and reliable methods for FMT attachment to the stapes head with missing incus and malleus. However, the difference and relationship of the vibration properties among these three FMT couplers remain unclear. In the present study, the stapes footplate velocity responses of the LP, CliP, and Bell couplers have been investigated in eight fresh temporal bones (TBs) to evaluate the vibration properties of these three couplers. Normal and reconstructed middle ear transfer functions (METFs) were determined from laser Doppler vibrometer (LDV) measurements. A mastoidectomy and a posterior tympanotomy were performed to expose the ossicular chain. The METFs of the normal middle ear and middle ear with LP-FMT-coupler were compared under acoustic stimulation, thus the mass effect of the FMT with LP coupler was evaluated. Additional comparisons were made between the stapes footplate vibrations of the LP-FMT-coupler (with the intact ossicular chain at the long process of the incus), CliP-FMT-coupler and Bell-FMT-coupler on the stapes head (after incus and malleus removed) under active electromechanical stimulation. After the installation of CliP-FMT-coupler and Bell-FMT-coupler to the middle ear, the average velocity amplitude of the stapes footplate, comparing to the LP-FMT-coupler, was about 15 dB higher between 1 and 6 kHz, and 10 dB lower at about 0.5 kHz. Quantitatively, there was no significant difference between the CliP-FMT-coupler and Bell-FMT-coupler. According to our study, installation of CliP-FMT-coupler or Bell-FMT-coupler on the stapes head provides considerable improvement of the middle ear mechanical and functional responses, comparing with the LP-FMT-coupler in the temporal bone experiments. Moreover, the installation of the Bell-FMT-coupler to the stapes head produces essentially the same footplate velocity responses in comparison to the CliP-FMT-coupler. (C) 2017 Elsevier B.V. All rights reserved.

NUMERICAL STUDY ON THE EFFECT OF THE FLOATING MASS TRANSDUCER ON MIDDLE EAR SOUND TRANSMISSION

Finite Element Analysis of the Effects of a Floating Mass Transducer on the Performance of a Middle Ear Implant.

THE EFFECT OF IMPLANTABLE TRANSDUCERS ON MIDDLE EAR TRANSFER FUNCTION: A COMPARATIVE NUMERICAL ANALYSIS

Transducer Type and Design Influence on the Hearing Loss Compensation Behaviour of the Electromagnetic Middle Ear Implant in a Finite Element Analysis

Numerical Simulation of Human Middle Ear Based on Finite-Element Method

Design of Piezoelectric Transducer for Middle Ear Implant Based on Coupling Model

A Comparative Study of MED-EL FMT Attachment to the Long Process of the Incus in Intact Middle Ears and Its Attachment to Disarticulated Stapes Head

Numerical study on the effect of attachment points of middle ear actuator on the movement of the stapes

Numerical Analysis Of Middle Ear Pressure Effects On Performance Of Implantable Hearing Devices

Numerical Modeling of Human Middle Ear Biomechanics Using Finite Element Method

The effect of using two coils in a floating mass transducer for implantable middle ear hearing devices

Design of a floating mass type piezoelectric transducer for use in implantable middle ear hearing aid

Effect of electromagnetic middle-ear implant simulating sites on the stapes spatial motion: A finite element analysis

Numerical Study on the Effect of Middle Ear Malformations on Energy Absorbance

Comparison of Class I Flextensional Transducers with Concave Staves Machined by Different Materials

Effect of stimulation sites on the performance of electromagnetic middle ear implant: A finite element analysis

The Influence of Implantable Actuators on Residual Hearing: A Computational Study

Finite Element Modeling of Sound Transmission Based on Micro-Computer Tomography for Human Ear

Finite Element Modeling of Ossicle for Sound Transmission

NUMERICAL MODELING OF HUMAN EAR FOR SOUND TRANSMISSION

Numerical analysis of the effect of attachment points of middle ear actuator on stapes movement