Abstract:Purpose - The purpose of this paper is to provide an improved structural design for accelerometers based on cantilever beam-mass structure and offer the descriptions of sensor fabrication, packaging and experiments. Design/methodology/approach - The cantilever beam-membrane (CB-membrane) structure is designed as the sensing element for piezoresistive accelerometers. In the CB-membrane structure, a cantilever beam and two identical membranes as a whole part supports the proof mass. Four piezoresistors are distributed on the surface of the cantilever beam to form a Wheatstone bridge. Finite element method is used to carry out the structural analysis and determine the sensor dimensions. The sensor chip is fabricated by bulk micro-machining technique, packaged in dual-in-line (DIP) way and tested. Findings - Compared with the conventional cantilever beam-mass (CB-mass) structure, the CB-membrane structure can improve the sensor's performances, including response frequency, output linearity and cross-axis sensitivity. The results of simulation and experiments prove that the CB-membrane accelerometer has good performances. Research limitations/implications - The accelerometer is simply packaged and the zero offset voltage has not been compensated. Moreover, the measured response frequency is lower than the simulated value. Further work and study are needed to solve these problems. Originality/value - The accelerometer with CB-membrane structure has good performances as the static and dynamic experiments show and is suitable to detect the spindle vibration of the machine tools.

Research on nonlinearity property of piezoelectric vibration accelerometer based on cymbal transducer

Research on Temperature Property of Piezoelectric Vibration Accelerometer Based on Cymbal Transducer

Non-linear Error Compensation of Voltage Sensitivity for Vibration Accelerometer Based on Cymbal Transducer

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Non-Liner Error Compensation of the New Vibration Accelermeter Based on Neural Network

The Investigation of Transverse Output Error Compensation Based on Piezoelectric Composite Vibration Accelerometer

Research on Transverse Sensitivity Property of Cymbal Piezoelectric Vibration Acceleration Sensor

Finite Element Analysis and Theoretical Model of Slotted Cymbal Composite Piezoelectric Transducer

Research on the Voltage Sensitivity of Differential Cymbal Piezoelectric Vibration Acceleration Sensor

CYMBAL PIEZOCOMPOSITES FOR VIBRATION ACCELEROMETER APPLICATIONS

Voltage sensitivity of a new type of vibration accelerometer

Research on Voltage Sensitivity of Vibration Accelerometer Based on Cymbal Transducer

Magnitude Versus Frequency Performance of Vibration Acceleration Sensor Based on Cymbal Transducer

Piezoelectric 6-dimensional accelerometer cross coupling compensation algorithm based on two-stage calibration

Nonlinear Vibration Reduction of Resonant Accelerometers Based on the Equivalent Nonlinear Circuit Model

High Sensitivity Cymbal-Based Accelerometer

Study of Cymbal Piezoelectric Composite Transducer Based on Finite Element Analysis

Design of a Piezoelectric Accelerometer with High Sensitivity and Low Transverse Effect

An improved structural design for accelerometers based on cantilever beam-mass structure

Design And Simulation Of A Novel Piezoresistive Accelerometer For High Accuracy And Overload Ability

Analysis of cymbal piezocomposite transducer's effective piezoelectric coefficients based on ANSYS