Abstract:This paper presents finite element (FE) modeling of the debonding behavior of fiber reinforced polymer (FRP)-to-concrete interfaces subject to mixed-mode loading, which is realized through a peeling test of FRP composites externally bonded onto a concrete substrate. A cohesive zone model (CZM) is implemented into the FE model to represent the behavior of the FRP-to-concrete interface. Two element schemes (orthotropic plane stress element and beam element) were employed to simulate the behavior of FRP composite plate in the peeling test. The orthotropic plane stress element scheme, bearing a clear physical background and with an easy definition of the material property parameters following the composite mechanics, is found to be superior to the beam element scheme, and thus is utilized to conduct parametric studies. The influences of the peeling angle, the interfacial parameters (i.e., the configuration of the cohesive zone models, the interfacial damage initiation law (DIL), the interfacial damage evolution law (DEL), the coupling of mode-I and mode-II components), on the mixed-mode failure of the FRP-concrete-interface are carefully investigated. The results showed that the mode I component plays a critical role in the debonding failure of FRP-to-concrete interfaces even when the peeling angle is very small. The failure of FRP-to-concrete interface transits promptly from a mode II-dominated one to a mode I-dominated one when the peeling angle increases to a relatively small value (e.g., 4 degree) and subsequently the peeling force (i.e., the debonding strength of FRP) decreases dramatically. Such mixity of the mode I and mode II components should be appropriately considered for refining the analysis of FRP-strengthened RC beams and the FRP debonding strength design, for which a pure mode II interfacial failure was usually assumed.

Analysis of interfacial cracking of RC beams strengthened with FRP

Investigation on Intermediate Crack Induced Debonding Failure of FRP Laminates in Flexurally FRP-Strengthened RC Beams

Evaluation of Allowable Frp Tensile Strain in Main Codes for Mitigation of Debonding Failure in Frp-Strengthened Rc Beams

Analysis of intermediate shear stress in cracked rc beams strengthened with frp

FEM analysis on mechanical parameters of interfacial crack of RC beams strengthened with FRP

Fracturing behaviors of FRP-strengthened concrete structures

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Numerical Analysis Of Debonding Mechanisms In Frp-Strengthened Rc Beams

Intermediate Crack Debonding in FRP-Strengthened RC Beams: FE Analysis and Strength Model

Study on Interfacial Shear Stress in RC Beams Strengthened with Prestressed FRP Laminates

Analysis of Interfacial Debonding of RC Beams Strengthened with CFL

Interfacial Mechanical Behaviors of Rc Beams Strengthened with Frp

Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Analysis of Interfacial Stresses for RC Beams Strengthened with Prestressed FRP

Interfacial Stress Analyses on RC Beams Strengthened With Pre-stressed FRP Under Concentrated Loading

Analysis of Mesoscopic Interfacial Mechanics of Rc Beams Strengthened with Frp

Propagation Behavior of Interfacial Fatigue Cracks in Rc Beams Strengthened with Pre-Stressed Frp

Finite Element Modeling for Debonding of FRP-to-Concrete Interfaces Subjected to Mixed-Mode Loading

Debonding Prediction of RC Beam Flexurally Strengthened with Prestressed FPR

Interfacial Stress Analysis of RC Beams Strengthened with Hybrid CFS and GFS