Abstract:In order to further study the anti-impact behavior of reinforced concrete beams strengthend with externally bonded FRP sheets,a RC beam without stirrups and two FRP-strengthened RC beams without stirrups were tested under impact loads and a FRP-strengthened beam was tested under static loads.Test results showed that the antiimpact capacity of FRP-strengthened RC beams significantly increases,especially,when they are strengthened with end anchoraged.Time-histories of impact force,mid-span displacement and strain of longitudinal reinforcement were analyzed,combined with failure modes of specimens,the anti-shear failure mechanism of CFRP-strengthened RC beams without stirrups under impact loading was obtained.It was shown that the failure process is divided into two stages including the shear failure of local part of the beams' mid-span under impact loading,and the subsequent shear failure of the impacted point directing to bearings.The FRP contributions to the beams' shear force-bearings in the two stages were discussed under impact loadin.g,respectively and compared with the theoretical shear force-bearings gained with different design codes.The comparison showed that the FRP-strengthened RC beams' dynamic shear force-bearings under impact loading in both stages are higher than the theoretical values and their shear force-bearings under static loads.Compared with the previous methods to estimate the shear force-bearings of CFRP-to-concrete interfaces under impact loading,the test results provided a reference for reasonably evaluating FRP contributions to FRP-strengthened RC beams' shear strength.

Study on Interfacial Shear Stress in RC Beams Strengthened with Prestressed FRP Laminates

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

Analysis of Interfacial Stresses for RC Beams Strengthened with Prestressed FRP

Interfacial Stress Analyses on RC Beams Strengthened With Pre-stressed FRP Under Concentrated Loading

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Analysis of interfacial cracking of RC beams strengthened with FRP

Analysis of intermediate shear stress in cracked rc beams strengthened with frp

Analysis of Debonding Load-Carrying Capacity for RC Beams Strengthened with Prestressed FPR Under Bending Load

RC beams shear-strengthened with FRP: Stress distributions in the FRP reinforcement

FEM analysis on mechanical parameters of interfacial crack of RC beams strengthened with FRP

Interfacial Stresses in Beams and Slabs Bondedwith Thin Plate

THEORETICAL ANALYSIS OF STRESS DISTRIBUTIONS IN FRP SIDE-BONDED TO RC BEAMS FOR SHEAR STRENGTHENING

Study on the Stress Threshold of Preventing Interfacial Fatigue Debonding in Concrete Beams Strengthened with Externally-Bonded FRP Laminates

Debonding Prediction of RC Beam Flexurally Strengthened with Prestressed FPR

Interfacial Mechanical Behaviors of Rc Beams Strengthened with Frp

Interfacial Stress Analysis of RC Beams Strengthened with Hybrid CFS and GFS

Behavior of Interfacial Stresses Between RC Beams and GFRP Sheets

Numerical Analysis Of Debonding Mechanisms In Frp-Strengthened Rc Beams

Mechanical Analysis Lose of Prestressed Frp Laminates for Strengthening Rc Beams

Propagation Behavior of Interfacial Fatigue Cracks in Rc Beams Strengthened with Pre-Stressed Frp

EXPERIMENTAL STUDY ON STRAIN DISTRIBUTION IN EXTERNALLY BONDED FRP FOR SHEAR STRENGTHENING OF RC BEAMS