Abstract:Thermal contact resistance is a crucial parameter for the thermal management of electronic devices, as it directly impacts the heat dissipation efficiency across densely packed component interfaces. This paper proposes a finite element modeling approach to predict thermal contact resistance. The model is based on the optically measured surface topography of Al6061 alloy pairs using a white light interferometer. A mechanical-thermal sequential coupling approach is developed to simulate the contact area and temperature distribution of the contact model. Elastic-plastic deformable mechanics and interface heat transfer in terms of spots and gap conduction are incorporated into the approach. The research indicates that the pressure between longitudinal surfaces significantly influences heat transfer preceding the solid contact point. At an upper surface load pressure of 0.15 MPa, the thermal contact resistance is 329 mm2·K/W. With a gradual increase in load up to 0.6 MPa, the thermal resistance decreases to 244 mm2·K/W. Moreover, the transition of interstitial gas from free molecules to a continuous state results in decreased thermal conductivity. Specifically, at gas pressures of 5 Pa and 1 atm, the thermal contact resistance reduces from 557 mm2·K/W to 270 mm2·K/W. Furthermore, the numerical results, when compared to experimental data under different gas pressures, exhibit a discrepancy of less than 15%. This outcome effectively validates the accuracy of the proposed method.

A simple setup to test thermal contact resistance between interfaces of two contacted solid materials

An Experimental Setup to Test Thermal Contact Conductance Across Solid/Solid Interface

An Experimental Investigation on Thermal Contact Resistance Across Metal Contact Interfaces

Experimental Study of Thermal Contact Conductance Across Solid/Solid Interface

The Effect Of Solid Interfaces On Thermal Contact Resistance At Low Temperature

An Experimental Study on Thermal Contact Conductance Across the SS316L/CuCrZr Interface

Experimental Study of Thermal Contact Conductance with Compensation Heater

The thermal contact resistance testing method study of thin film materials

Research Progress of Thermal Contact Resistance

Compensation Heating Technique for Experimental Investigation of Thermal Contact Conductance Across GH4169/K417 Interface

An improved steady-state method for measuring the thermal contact resistance and bulk thermal conductivity of thin-walled materials having a sub-millimeter thickness

Experimental Investigation of High Temperature Thermal Contact Resistance of Thin Disk Samples Using Infrared Camera in Vacuum Condition

A High-Precision Instrumentation of Measuring Thermal Contact Resistance Using Reversible Heat Flux

Measuring the thermal contact resistance of a junction by T type probe method

Influence of temperature and pressure on solid to solid thermal contact resistance

Numerical study of thermal contact resistance considering spots and gap conduction effects

Influences of temperature and contact pressure on thermal contact resistance at interfaces at cryogenic temperatures

Experimental Investigation of the Thermal Impedance of Interstitial Material at A Junction

An Improved Hot Probe Method to Measure Thermal Conductivity of Solid Materials in Situ

Implementation of Thermal Contact Conductance in Thermal Simulation Calculations