Abstract:Thermal contact resistance is a crucial parameter for the thermal management of electronic devices, as it directly impacts the heat dissipation efficiency across densely packed component interfaces. This paper proposes a finite element modeling approach to predict thermal contact resistance. The model is based on the optically measured surface topography of Al6061 alloy pairs using a white light interferometer. A mechanical-thermal sequential coupling approach is developed to simulate the contact area and temperature distribution of the contact model. Elastic-plastic deformable mechanics and interface heat transfer in terms of spots and gap conduction are incorporated into the approach. The research indicates that the pressure between longitudinal surfaces significantly influences heat transfer preceding the solid contact point. At an upper surface load pressure of 0.15 MPa, the thermal contact resistance is 329 mm2·K/W. With a gradual increase in load up to 0.6 MPa, the thermal resistance decreases to 244 mm2·K/W. Moreover, the transition of interstitial gas from free molecules to a continuous state results in decreased thermal conductivity. Specifically, at gas pressures of 5 Pa and 1 atm, the thermal contact resistance reduces from 557 mm2·K/W to 270 mm2·K/W. Furthermore, the numerical results, when compared to experimental data under different gas pressures, exhibit a discrepancy of less than 15%. This outcome effectively validates the accuracy of the proposed method.

Influence of temperature and pressure on solid to solid thermal contact resistance

Influences of temperature and contact pressure on thermal contact resistance at interfaces at cryogenic temperatures

Simulation study on thermal boundary resistance between different metals at low temperature

Temperature dependence of contact angles of water on a stainless steel surface at elevated temperatures and pressures: In situ characterization and thermodynamic analysis.

Influence of Thermal Conductivity on Brazing Quality of Electrical Contact Components

An Experimental Study on Thermal Contact Conductance Across the SS316L/CuCrZr Interface

An Experimental Investigation on Thermal Contact Resistance Across Metal Contact Interfaces

Measurement of Thermal Diffusivity/thermal Contact Resistance Using Laser Photothermal Method at Cryogenic Temperatures

A simple setup to test thermal contact resistance between interfaces of two contacted solid materials

Research on Temperature Rise and Contact Resistance of Rivets Contacts

The Effect Of Solid Interfaces On Thermal Contact Resistance At Low Temperature

Numerical study of thermal contact resistance considering spots and gap conduction effects

Experimental Investigation of High Temperature Thermal Contact Resistance of Thin Disk Samples Using Infrared Camera in Vacuum Condition

Research Progress of Thermal Contact Resistance

An improved thermal contact resistance model for pressed contacts and its application analysis of bonded joints

Numerical and Experimental Investigation on Single-Point Thermal Contact Resistance

Effects of Thermal Conductivity on the Thermal Contact Resistance Between Non-Conforming Rough Surfaces: an Experimental and Modeling Study

Investigation Regarding the Influence of Contact Condition on the Thermal Contact Resistance Between Copper and Indium

Study on Thermal Elasto-plastic Contact Problems with Temperature-dependent Properties

An improved steady-state method for measuring the thermal contact resistance and bulk thermal conductivity of thin-walled materials having a sub-millimeter thickness