A Novel Permanent Magnet Vernier Machine with Coding-Shaped Tooth.
Li Fang,Dawei Li,Xiang Ren,Ronghai Qu
DOI: https://doi.org/10.1109/tie.2021.3088331
IF: 7.7
2022-01-01
IEEE Transactions on Industrial Electronics
Abstract:It is well known that permanent magnet Vernier machine (PMVM) has multiple flux field harmonics, which can produce stable torque. However, some flux field harmonics would create torque that undermines the total torque output. Such as the 6 slots 26 poles split-tooth PMVM here, of which modulated flux field outputs torque while fundamental flux field undermines torque output. In this article, a 26 pole PMVM with coding-shaped tooth is proposed. The coding-shaped tooth can introduce permeance harmonics with specific phase and amplitude, thus modulating flux fields that all output torque. Air-gap permeance harmonics of the proposed and the regular split-tooth PMVM are obtained via FEA. Based on MMF-permeance model, flux fields of two machines and their contributions to average torque are investigated, proving that the proposed machine has multiple flux fields that all output torque. Moreover, by optimizing geometric parameters of coding-shaped tooth, the proposed machine could obtain largest average torque and smallest torque ripple simultaneously. Electromagnetic performances of the optimized machines are studied comparatively in semianalytical way and FEA. It is proved that with same overall size, PM usage, and copper loss, the proposed machine could achieve 30% larger torque density, 86% smaller cogging torque, and 62% lower torque ripple than its counterpart. Finally, a 16-N·m (rated) prototype is built and tested.