Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Robust Optical Fiber Grating Achieved by Femtosecond Laser Exposure

Fabrication of High-Temperature Tilted Fiber Bragg Gratings Using a Femtosecond Laser.

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Nanoscale morphology and thermal properties of low insertion loss fiber Bragg gratings produced using the phase mask technique and a single femtosecond laser pulse

Bragg Gratings in All-Solid Bragg Photonic Crystal Fiber Written With Femtosecond Pulses

&Lt;title>fabrication of High-Reflectivity Fiber Bragg Gratings by Excimer Laser Irradiated Phase Masks</title>

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Femtosecond laser fabrication of long period fiber gratings and applications in refractive index sensing

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Enhanced temperature characteristics of strain-assisted fiber Bragg gratings inscription by femtosecond laser pulses

Suppression of the Thermal Effects in the Femtosecond Laser Processing of Fiber Bragg Gratings

High Reflectivity, Ultraflat-Spectrum Chirped Fiber Bragg Grating Written Using Low Energy UV Femtosecond Pulses

Ultra-high-temperature Resistant Distributed Bragg Reflector Fiber Laser Based on Type II-IR Fiber Bragg Gratings.

High-Temperature Annealing Behaviors of CO $_{2}$ Laser Pulse-Induced Long-Period Fiber Grating in a Photonic Crystal Fiber

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Recovery of a Highly Reflective Bragg Grating in DPDS-doped Polymer Optical Fiber by Thermal Annealing.

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

Femtosecond Laser Inscribed Sapphire Fiber Bragg Grating for High Temperature and Strain Sensing