Abstract:This study explored the influence factors of the acoustic vibration performance of wood-carbon fiber compos-ite materials and the feasibility of using wood substitute materials for musical instrument boards. It started from the presenting of the two angles of composite material layer structure and carbon fiber laying direction. The acoustic vibra-tion performance parameters of wood-carbon fiber composite specimens ( specific Youngs modulus, E/G value, a-coustic impedance, etc.) were compared and analyzed. As one of the commonly used sound board material for musical instruments, the Picea sitchensis was used as the reference. The results showed that the direction of carbon fi-ber had a significant effect on the acoustic vibration properties of composites. When the orientation of carbon fiber in-creased from 0° to 45° or 90°, the specific Youngs modulus and the E/G value of wood-carbon fiber composite mate-rials decreased in variable degrees, while the acoustic impedance increased. Through the comparison of the specimens with the same laying angle and different layers, it can be found that the timbre quality of the wood-carbon fiber com-posites was greatly affected by the layer number. When the layer number increased from five to seven layers, the tim-bre quality was worsened obviously. The compared results between the wood-carbon fiber composite group with excel-lent acoustic vibration performance and the materials of P. sitchensis showed that wood carbon fiber composites had excellent specific Youngs modulus and E/G value, but the acoustic impedance of the composites was relatively poor, which needed to be improved. The wood-carbon fiber composite with five-layer structure (veneer/carbon fiber cloth/veneer/carbon fiber cloth/veneer) and 0° carbon fiber direction can achieve better acoustical vibration performance. Its specific Youngs modulus of 25.55 GPa·cm3/g was only 1.66% lower than that of P. sitchensis (25.98 GPa·cm3/g). And its E/G value (27.89) was 38.48% higher than that of P. sitchensis (20.14), which is comparable to the timbre performance of P. sitchensis.

Acoustic vibration properties of wood for musical instrument based on FFT of adding windows

Acoustic Vibration Property of Full-Size Spruce Wood Soundboard of Musical Instruments

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Effects of Variance Coefficient of Growth Ring Width on Sound Vibration Parameters of Picea Wood

Study on Acoustic Vibration Performance of Wood-Carbon Fiber Composite Materials with Different Laying Patterns

Research on vibration property of Picea wood for piano sound quality neural network and ant colony algorithm

Present Research Situation and Development Trend of Wood Acoustical Properties Using for Chinese Folk Musical Instruments

Modulating the Acoustic Vibration Performance of Wood by Introducing a Periodic Annular Groove Structure

Effects of Furfurylation on Acoustic Vibration Performance of Paulownia Wood

Application of Analytic Hierarchy Process to Vibrational Property Evaluation of Soundboard Wood for Musical Instrument

Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air

Advances in Study and Research on Acoustic Property of Wood for Soundboard of Musical Instrument

Investigating the acoustical properties of carbon fiber-, glass fiber-, and hemp fiber-reinforced polyester composites

Influence of the Vibrational Properties of the Resonance Board on the Acoustical Quality of A Piano

Paulownia (Paulownia elongata S.Y.Hu) – importance for forestry and a general screening of technological and material properties

Vibration Testing for the Evaluation of the Effects of Moisture Content on the In-Plane Elastic Constants of Wood Used in Musical Instruments

Influence of the Grain Orientation of Wood upon Its Sound Absorption Properties

Effect of Vibration Properties of a Resonance Board on Piano Timbre

Identification of anisotropic vibrational properties of Padauk wood with interlocked grain

Perceptual evaluation of bracewood and soundboard wood variations on the preference of a steel-string acoustic guitar