Abstract:This paper introduces a novel algorithm for designing a low-pass filter (LPF) and a microstrip Wilkinson power divider (WPD) using a neural network surrogate model. The proposed algorithm is applicable to various microwave devices, enhancing their performance and frequency response. Desirable output parameters can be achieved for the designed LPF and WPD by using the proposed algorithm. The proposed artificial neural network (ANN) surrogate model is employed to calculate the dimensions of the LPF and WPD, resulting in their efficient design. The LPF and WPD designs incorporate open stubs, stepped impedances, triangular-shaped resonators, and meandered lines to achieve optimal performance. The compact LPF occupies a size of only 0.15 λg × 0.081 λg, and exhibits a sharp response within the transmission band, with a sharpness parameter of approximately 185 dB/GHz. The designed WPD, operating at 1.5 GHz, exhibits outstanding harmonics suppression from 2 GHz to 20 GHz, with attenuation levels exceeding 20 dB. The WPD successfully suppresses 12 unwanted harmonics (2nd to 13th). The obtained results demonstrate that the proposed design algorithm effectively accomplishes the LPF and WPD designs, exhibiting desirable parameters such as operating frequency and high-frequency harmonics suppression. The WPD demonstrates a low insertion loss of 0.1 dB (S21 = 0.1 dB), input and output return losses exceeding 30 dB (S11 = −35 dB, S22 = −30 dB), and an output ports isolation of more than 32 dB (S23 = −32 dB), making it suitable for integration into modern communication systems.

Modeling approach for distributed RF MEMS phase shifter based on IA-BP neural network

Modeling technique for down-state of RF MEMS phase shifter based on artificial neural network

An Efficient Modeling Technique For Rf Mems Phase Shifter Based On Rbf Neural Network

Design Parameters Modeling for RF MEMS Phase Shifter Based on Artifical Neural Network

An Ultra Broadband Passive Vector Modulator Phase Shifter

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

Polymorphic Impedance Matching Technique for MEMS Phase Shifter

Behavioral Modeling of Nonlinear RF Power Amplifiers Using Ensemble SDBCC Network

Ultrawideband Schiffman Phase Shifter Designed With Deep Neural Networks

The Study of Millimeter-wave MEMS Phase shifter feed network

Design of RF MEMS Phase Shifter Based on Saw-Shaped CPW

A Fast Surrogate Model-Based Algorithm Using Multilayer Perceptron Neural Networks for Microwave Circuit Design

Modeling and Design of the Novel MEMS Phase Shifter for Ka Band Applications

A Novel Design Of Rf-Mems Phase Shifter Based On Bridge-Like Coplanar Waveguide

An Improved Design for Ka-Band Phase Shifter Using Distributed MEMS Transmission Line Structure

RF Characteristics Investigation of MEMS Phase Shifter with CPW Discontinuities

An Improved Design for Ka-Band Phase ShifterUsing Distributed MEMS Transmission LineStructure

A DMTL Phase Shifter Using Insulation Layer and Saw-Shaped CPW