Abstract:Monitoring glucose levels is one of the main diagnostic methods for preventing and treating diabetes. Conventionally monitoring of blood glucose through a finger-stick procedure brings pain. It is essential to develop biosensors for low concentration glucose detection in non-invasive samples. In this paper, a tilted fiber grating based localized surface plasmon resonance (LSPR) biosensor for ultrasensitive glucose detection has been demonstrated. The glucose biosensor was fabricated by immobilization of Au nanoparticles (AuNPs) onto an excessively tilted fiber grating (Ex-TFG) and subsequent biofunctionalization by coating polydopamine and concanavalin A onto the AuNPs/Ex-TFG surface. The biosensor has the response regions covering low, middle and high glucose concentrations. The resonance peak indicates a redshift of 0.24 nm, 0.06 nm and 0.48 nm in the concentration ranges of 1.0 nM $- 1.0\,\, \boldsymbol {\mu }\text{M}$ , $1.0\,\, \boldsymbol {\mu }\text{M}- 50.0\,\, \boldsymbol {\mu }\text{M}$ and $50.0\,\, \boldsymbol {\mu }\text{M}-5.0$ mM, respectively. The limit of detection (LOD) of the biosensor in pure phosphate buffered saline is 2.5 nM. The high sensitivity and specific selectivity for D-glucose detection are attributed to strong coupling between the evanescent fields from transverse magnetic (TM) cladding modes of the Ex-TFG and the localized electric fields from LSPR of the AuNPs and their biofunctionalization, and resulting in remarkable enhancement of localized effective refractive index with slightly increased D-glucose concentration. Especially, the glucose biosensor based on the Ex-TFG coupled with the biofunctionalized AuNPs, has been demonstrated to be of practical utility to detect the glucose in artificial urine, which has potential applications in non-invasive glucose monitoring for early diagnosis and better management of diabetes.

Nanoporous Polymeric Grating-Based Biosensors

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Nanoporous TiO 2/polyion thin-film-coated long-period grating sensors for the direct measurement of low-molecular-weight analytes

Porous Silicon Based on Multilayer Dielectric‐grating Optical Sensors with Enhanced Biosensing

Label-Free Biosensor Based on Particle Plasmon Resonance Coupled with Diffraction Grating Waveguide

Porous Silicon Based Resonant Grating Filters for Biochemical Sensing Applications

Angle-Resolved Diffraction Grating Biosensor Based On Porous Silicon

Grating Bio-Microelectromechanical Platform Architecture for Multiple Biomarker Detection

A Novel Porous Silicon-Based Multilayer Dielectric-Grating Structures for Diffraction-Based Sensing

A Flexible Nanostructured Multimodal Sensor Based on Surface Plasmon Resonance

Surface Micro-Patterned Biofunctionalized Hydrogel for Direct Nucleic Acid Hybridization Detection

Fabrication of a cost-effective polymer nanograting as a disposable plasmonic biosensor using nanoimprint lithography

Chemically Responsive Hydrogel with Nanoparticle Enhanced Detection for Small Biomolecules

Integrated Dual Grating Polymer Microbeams for Bio-Chemical Sensing in Liquid Environment

"Grafting-from" and "Grafting-to" Poly(N-isopropyl acrylamide) Functionalization of Glass for DNA Biosensors with Improved Properties

Label-free Oligonucleotide Biosensor Based on Dual-Peak Long Period Fiber Grating

Organic silicone sol-gel polymer as a noncovalent carrier of receptor proteins for label-free optical biosensor application.

Nanoplasmonic Structure of a Polycarbonate Substrate Integrated with Parallel Microchannels for Label-Free Multiplex Detection

Optical Waveguide Sensor Based on Silica Nanotube Arrays for Label-Free Biosensing.

Ultrasensitive Glucose Biosensor Using Micro-Nano Interface of Tilted Fiber Grating Coupled with Biofunctionalized Au Nanoparticles

Ultrathin plasmonic nanogratings for rapid and highly-sensitive detection