Abstract:This paper is concerned with the design of a multi-layer overlapping structure consisting of a series of cavities and necks for acoustic wave absorption within continuous broadband at lower frequencies. The acoustic absorber is designed as a periodic structure, whose fundamental units can be regarded as Helmholtz resonators. A finite element model based on the linearized Navier-Stokes equations is devel-oped to evaluate the thermal and viscous dissipation of the absorber. To verify the acoustic absorption characteristics of the structure, a series of absorbers fabricated by 3D printing are tested in an impedance tube. The numerical solutions of the acoustic absorption coefficient are in good agreement with the experimental results. It is found that the coupling effect of the cavities and the necks strengthens the sound absorption performance of the absorber in a wideband at lower frequencies. Physical insights into the absorption mechanism of the overlapping structure due to the energy dissipation of the necks are provided. The effects of the geometrical parameters including length, width and radius of the absorber on the acoustic wave absorption of the structure are investigated. In order to verify the efficiency of the designed overlapping structure for noise control in practical applications, a number of absorbers are mounted inside a scaled payload fairing of a space launch vehicle. The results show that the inner noise of the payload fairing can be significantly reduced in a broadband with a maximum value of 40 dB. (c) 2021 Elsevier Ltd. All rights reserved.

Design of multi-layers absorbers for low frequency applications

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Ultrabroadband and Omnidirectional Absorbers Based on a Tandem Multilayer Structure

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

Design of a multilayer absorber for ultra‐wideband radar cross section reduction

Design of a Multilayered Frequency Selective Surface Absorber for the Suppression of Grating Lobes

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

A Composite Absorber of FSS and Area-coated Honeycomb Using High-loss Materials for Broadband Applications

Ultra-wideband Passive Double-Layer Absorber Design from the Reflective Point

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

Composite Absorber of Broadband and High Attenuation with Spiral Frequency Selective Surfaces

On the Design of Ultralow-Profile Broadband Absorber Based on Non-Foster Circuit

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

On the Design of Wideband Absorber Based on Multilayer and Multiresonant FSS Array

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

An Ultra-Thin Broadband Active Frequency Selective Surface Absorber For Ultrahigh-Frequency Applications

A Multi-Layer Overlapping Structure for Continuous Broadband Acoustic Wave Absorption at Lower-Frequencies

Design of a wide-band nearly perfect absorber based on multi-resonance with square patch

An Ultra-Wideband Metamaterial Absorber With Active Frequency Selective Surface

On the design of ultra-wideband circuit analog absorber based on quasi-single-layer FSS

Ultra-thin broadband absorber using active non-Foster devices and FSS-magnetic material