Abstract:This study used an in-house designed induction-aided hot embossing (IHE) setup to make polymer-based hydrophobic optical diffuser film for LED lights. Negative-featured micron sized V-shaped grooves (Width and depth -300 μm, angle -60°, adjacent distance-500 μm) were fabricated on the mold to develop the micro-textured mold required for the hot embossing via μ-WEDM. In this study, polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), and polycarbonate (PC) were used as working substrates. Initially, the parametric investigation was carried out by considering the four main parameters of IHE, i.e., embossing temperature-(Te), pressure-(Pe), duration-(te), and deembossing temperature-(Tde). Parametric analysis shows that the height of the embossed micron-sized V-shaped-grooves on the polymer substrate significantly affects the embossed diffuser film's wettability and lighting efficiency. Embossed PC diffuser film showed the highest height, WCA, and illumination in all parametric investigations. Finally, PC diffuser film was made with the optimal IHE parameters: Te-225°C, Pe-40 Kg/cm2, te-600 seconds, Tde-30°C. This set of settings resulted in a maximum V-groove height of 273.35 ± 4.71 μm and a 94.52% replication rate. Illumination analysis of embossed PC diffuser film (171×10^2 (lux)) compared to traditional/bare film (71×10^2 (lux)) revealed a 137.5% percentile gain in illumination. A laser-based optical system was employed for optical characterization, and the X-direction diffused light length on the white screen was measured. The best diffused light length was 109.35 mm for embossed PC diffuser film. To compare plain and embossed diffuser film lighting effectiveness, RGB photos captured by CCD-RGB camera were converted to HSI images to determine hue, saturation, and intensity. The intensity dropped most with embossed PC diffuser film. It shows that embossed PC diffuser sheet diffuses light better. Finally, wettability study showed that all embossed diffuser film surfaces are hydrophobic. Embossed PC diffuser film had the highest WCA (95.3°) and 27.71% higher wettability than bare film.

Moisture Diffusivity Analysis Of Polycarbonate For Led Lens

Effects of Curing Temperature and Uv Intensity on Electro-Optical Properties of Psct Reverse-Mode Light Shutters

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

Effect mechanism of moisture diffusion on LED reliability

Investigation Of Moisture Diffusion In Plastic Electronic Packages By Molecular Dynamics Simulation

In-situ characterization of moisture absorption and hygroscopic swelling of silicone/phosphor composite film and epoxy mold compound in LED packaging

Effects of Moisture Diffusion on a System-in-Package Module by Moisture–Thermal–Mechanical-Coupled Finite Element Modeling

Effects of Moist Environments on Led Module Reliability

Optical characteristics and mechanism analysis of polycarbonate/poly(1,4-cyclohexanedimethyl-1,4-cyclohexanedicarboxylate) blends

Thermal Degradation Behavior and Flame Retardancy of Polycarbonate Containing Poly[(phenylsilsesquioxane)-co-(dimethylsiloxane)] and Potassium Diphenyl Sulfonate

Effect of Temperature and Moisture on LED Reliability and Its Mechanism Analysis

Fabrication of Hydrophobic Optical Diffuser Film for LED Lights through Induction-aided Hot Embossing using Micro-textured Mold Fabricated by μ-WEDM: Parametric analysis, Wettability Study and Optical Characterization

Effect of MMA concentration on the structure and property of PC/MMA composites

A Novel Light Diffuser Based on the Combined Morphology of Polymer Networks and Polymer Balls in a Polymer Dispersed Liquid Crystals Film

Study on the Optical Properties of Conformal Coating Light-Emitting Diode by Monte Carlo Simulation

Study on Simulation and Application of Automotive Interior Polycarbonate Film Thermoforming Technology

Reliability Test and Failure Analysis of High Power LED Packages

Light Diffusing and Flame-Retardant Polycarbonate Modified by Highly Efficient and Multifunctional Organosilica Microspheres

Influences of hygrothermal conditions and structure parameters on moisture diffusion behavior in a system‐in‐package module by moisture-thermal-mechanical-coupled finite element modeling

Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package

High-performance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials.