Abstract:Attachment of semiconductor devices to a package substrate is essential for providing electrical and structural connections as well as a heat dissipation path. The die-attach materials play a vital role in ensuring the system performance and reliability. As the electronics industry continues to integrate more functions in smaller packages, the electrical, thermal and mechanical properties of the existing die-attach materials such as solders and conductive epoxies fail to meet more demanding requirements for performance and reliability. To address this problem, we developed low-temperature sintered nanosilver as a new die-attaching material. Experimental results of the electrical, thermal, and mechanical properties of the sintered silver die-attachment are presented in this paper. The nanoscale silver paste was made by dispersing 30-nm silver powder under ultrasonic agitation in an organic binder system. The electrical resistivity, obtained from screen printed resistor patterns on an insulate substrate that were sintered at 280degC for around 10 minutes in air, was found to be 2.6 times 10 5 (Omegamiddotcm)-1. The thermal conductivity was obtained by the laser flash method and was found to be 240 W/K-m. Both values are lower than those of bulk silver because the sintered silver had a density around 80%. The coefficient of thermal expansion (CTE) of the sintered silver was measured by dilatometry and was found to be 19 times 10-6/degC, nearly identical to that of bulk silver. The apparent elastic modulus of the sintered silver was found to be 9 GPa while the yield strength was around 43 MPa. Furthermore, die-shear tests on devices bonded by the sintered silver gave strength of around 21 MPa for a gold-metallized substrate and strength of 38 MPa for a silver-metallized substrate. These results demonstrate that the nanoscale silver paste sintered at low temperature is an excellent alternative to solders or epoxies for die attachment

Study on Adhesive Reliability of Low-Temperature Sintered High Power LED Modules

Study On Solder Bonding Technology And Its Failure Mechanism

Thermomechanical Reliability of Low-Temperature Sintered Silver Die-Attachment

Improved Thermal Performance of High-Power Led by Using Low-Temperature Sintered Chip Attachment

Potential interconnect technologies for high power LEDs assemblies

Improvement of high-power LED performance with sintered chip attachment

Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection

Emerging Lead-Free, High-Temperature Die-Attach Technology Enabled By Low-Temperature Sintering Of Nanoscale Silver Pastes

Characterization of Low-Temperature Sintered Nanoscale Silver Paste for Attaching Semiconductor Devices

Effects of Bonding Materials on Optical–Thermal Performances and High-Temperature Reliability of High-Power LED

Reliability Inspection for Bilayer Nanosilver Paste Ensemble Pressureless Sintered Embedded Cooling SiC Power Module

Study on Low Temperature Sintering Mechanism and Performance of Multiscale Silver Paste

High-Temperature Reliability of Nano-Ag Sintered Joints on Ag-Plated Cu Substrates

Study on die-bonding key technology of UV LED packaging

Enhancing Semiconductor Package Reliability through Mechanical Property Optimization of Pressureless Sintering Die Attach Adhesives

Low-temperature Sintering Technique for High-temperature Power Semiconductor Devices Packaging

Low-Temperature Sintering of Nanoscale Silver Pastes for High-Performance and Highly-Reliable Device Interconnection

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Joint Analysis and Reliability Test of Epoxy-Based Nano Silver Paste Under Different Pressure-Less Sintering Processes

Mechanical and Microstructural Analysis of an Ultra-Flexible Nano-Silver Paste Sintered Joint

Low-temperature and pressureless sintering technology for high-performance and hightemperature interconnection of semiconductor devices