Abstract:The EXEJET project is a large-scale jet noise collaborative program by Snecma, Onera and Airbus. In this framework, an exhaustive experimental database has been collected on a realistic dual-jet stream mounted around a central plug. The high-bypass ratio jet is operated at approach conditions in the CEPRA19 anechoic wind-tunnel. In the present paper, several Large-Eddy Simulations (LES) have been performed on the EXEJET baseline configuration using the unstructured flow solver AVBP developped at Cerfacs. The nozzle inlet boundary conditions are obtained by performing RANS simulations until the nozzle exit total pressure conditions match the experimental pressure probe survey. Three LES simulations have been performed following the numerical strategy developped by the present authors, the first one with a fully tetrahedral mesh, the second one uses a hybrid mesh including prismatic layers to better resolve the boundary layer development in the nozzles and finally, a finer mesh including an original tripping method near the fan jet exit to trigger the laminar to turbulent transition of the external mixing layer. The boundary layers developping in the nozzles have a major influence on the turbulent jet streams mixing. The mean velocity magnitude and turbulent kinetic energy evolution along the jet from the PIV measurements are well captured with the three simulations but a better agreement is obtained with the finer hybrid tripped simulation. The acoustic predictions obtained using a Ffowcs William and Hawking’s analogy are in good agreement with the experimental measurements especially at 30◦ degree in the downstream direction. The successive meshes tested bring similar acoustic results in the low and middle frequency ranges. The hybrid meshes recover the proper high-frequency decay of the sound levels and the cut-off frequency is increased with the mesh refeinement. Preliminary beamforming results have identified two main noise sources upstream and downstream the core-jet collapse.

Large-eddy simulation of the noise from a subsonic jet-edge system

Large Eddy Simulation of Supersonic Jet Noise from A Circular Nozzle

Numerical Simulation of Broadband Shock-Associated Noise from A Circular Supersonic Jet

Effects and Mechanisms of LES and DDES Method on Airfoil Self-Noise Prediction at Low to Moderate Reynolds Numbers

Wake Modification and Noise Emission of Serrated NACA 65(12)-10 at Moderate Reynolds Number

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

Large Eddy Simulation for Jets from Chevron and Dual Flow Nozzles

Unstructured LES of the Baseline EXEJET Dual-Stream Jet

Numerical Analysis of Broadband Noise Reduction with Wavy Leading Edge

Large-eddy Simulation of Flow Noise from Turbulent Flows Past an Axisymmetric Hull Using High-Order Schemes

Large-Eddy Simulation and Aeroacoustic Prediction of Supercritical Airfoil Side-Edge Noise

Far Field Noise Prediction Of Subsonic Hot And Cold Jets Using Large-Eddy Simulation

Large-scale structure evolution and sound generation in a hotjet

Direct Numerical Simulation Of Sound Generation From Airfoils At Low Mach Number Flows

Numerical Simulation of the Generation Mechanism of Axisymmetric Supersonic Jet Screech Tones

Noise Generation in Flow over A Full-Span Trailing-Edge Flap

Numerical Investigation of Wavy Leading Edges on Rod–Airfoil Interaction Noise

Large-eddy simulation of hydrodynamic noise from turbulent flows past an axisymmetric hull using high-order schemes

Influence of Different Subgrid Scale Models in LES of Supersonic Jet Flows

Numerical Simulation of the Generation of Axisymmetric Mode Jet Screech Tones

Airfoil trailing-edge noise source identification using large-eddy simulation and wavelet transform