Abstract:The mechanical characteristics of asphalt mixture are closely related with its stress state, temperature, and loading rate, therefore, the loading condition of the asphalt mixture's dynamic modulus test should be consistent with the actual temperature, loading frequency, and stress state that are applied to the mixture in actual pavement, thus can the test produce an objective result that can accurately reflect the actual stress-strain relationship for the asphalt mixture. However, due to limitations in the loading capacity of current dynamic modulus test equipment, the present modulus tester cannot yet set such a loading condition whose stress state is consistent with that of asphalt mixture in actual pavement. As a result, the modulus testing results of the current test may not accurately reflect the actual stress-strain characteristics of an asphalt mixture under real traffic loads. Therefore, this paper aims to figure out the impact of stress state on asphalt mixture's dynamic modulus, and firstly conducts a numerical analysis to ascertain asphalt pavement's triaxial stress state at different depth, then, utilizing the nonlinear elasticity theory of Soil Plasticity, proposes a theoretical model that can reflect triaxial stress state's effect on asphalt mixture's dynamic modulus, and then, arranges a series of triaxial dynamic modulus tests for asphalt mixture in different stress state to verify the model's effectiveness, and meantime analyzes stress state's influencing rule to asphalt mixture's dynamic modulus. Their results indicate, the asphalt mixture of the actual pavement is in an obvious triaxial stress state, and that the higher the triaxial stress state, the larger the dynamic modulus, particularly for the mixture near the surface, whose high stress state will lead to their dynamic modulus to be significantly larger than that of the underlying course, while the model proposed in this paper can to a large extent reflect this impact.

Method to Test Dynamic Modulus of Asphalt Mixture Based on Semi-Circular Specimens

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

An Inverse Approach to Determine Complex Modulus Gradient of Field-Aged Asphalt Mixtures

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Evaluation of Complex Poisson’s Ratio of Aged Asphalt Field Cores Using Direct Tension Test and Finite Element Simulation

Study on Conversion Between Creep Compliance and Relaxation Modulus of Asphalt Mixture

Study on Design Parameters of Semi Flexible Composite Concrete Chinese Full Text

Comparative Study on Complex Modulus and Dynamic Modulus of High-Modulus Asphalt Mixture

Experimental Analysis of Dynamic Modulus and Phase Angle of High Modulus Asphalt Mixture

Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

Steady-state Dynamic Method: an Efficient and Effective Way to Predict Dynamic Modulus of Asphalt Concrete

Dynamic Stiffness of Bituminous Mixtures for the Wearing Course of the Road Pavement-A Proposed Method of Measurement

Impact of triaxial stress state at various pavement depths on the dynamic modulus of asphalt mixture

Modified Two-Phase Micromechanical Model and Generalized Self-Consistent Model for Predicting Dynamic Modulus of Asphalt Concrete

Reliability of Calculation of Dynamic Modulus for Asphalt Mixtures Using Different Master Curve Models and Shift Factor Equations

Predicting Dynamic Modulus of Asphalt Mixture Using Data Obtained from Indirect Tension Mode of Testing

A Dynamic Loading Test for Evaluating Permanent Deformation Resistance of Asphalt Mixtures

Study on Dynamic Modulus of Asphalt Mixture in Cold Regionunder Rotary Accelerated Loading

Optimum Test Section on Simulation Test of Asphalt Mixtures