Abstract:A composite coating of hydroxyapatite (HA)/multi-walled carbon nanotubes (MWNTs) has been fabricated by electrophoretic deposition (EPD). The nano powders of HA and MWNTs were dispersed in ethanol with total concentration of 0.005 g/mL and MWNTs 20% and 30% contents (wt). And the pH value of suspension was adjusted in a range from 4 to 5. After stabilization the mixture was ultrasonically treated for 3 h to form a stable suspension. Prior to the electrophoretic deposition, the titanium substrate was hydrothermally treated at 140 in NaOH (10 mol/L) solution for 6 h. A titanium sheet and circinal net of stainless steel were used as a cathode and an anode respectively, and a constant deposition voltage of 30 V was applied for 50–60 s in the EPD process. The thickness of the coatings was controlled from 10 μm to 20 μm. The samples of composite coating were then sintered in a resistance tube furnace in flowing argon at 700 for 2 h. The structure of the as prepared coating was characterized by SEM and XRD, and the bonding force of the coating/substrate was measured by an interfacial shear strength test. It is shown that the bonding strengths between the coating and the titanium substrate is as high as 35 MPa. The cell culture experiments indicate that the prepared composite coating of HA/MWNTs possesses good biocompatibility.

The preparation and microstructure of CNTs/HAp biocomposite coating

Electrophoretic Deposition of HA/CNTs Composite Coating

Pulsed Electrodeposition of Carbon Nanotubes-Hydroxyapatite Nanocomposites for Carbon/carbon Composites

Preparation and Properties of In-Situ Growth of Carbon Nanotubes Reinforced Hydroxyapatite Coating for Carbon/carbon Composites

Fluoridated Hydroxyapatite/Carbon Nanotubes Composite Coating Fabricated by Radio Frequency Magnetron Sputtering

Electrophoretic deposition of HA/MWNTs composite coating for biomaterial applications

Preparation of Hydroxyapatite Coatings on Carbon/Carbon Composites by a Hydrothermal Electrodeposition Process

Tne Preparation and Characterization of Nano-Ag/hap Bioceramic Coating on Titanium Surface

Preparation and characterization of carbon nanotubes/hydroxyapatite composites

Fabrication and Characterization of HAp /al2o3 Composite Cating on Titanium Substrate

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Preparation and Characterization of Hydroxyapatite/Polyacrylamide Biological Composite Coating on Carbon/Carbon Composites

Single-walled carbon nanotubes/hydroxyapatite coatings on titanium obtained by electrochemical deposition

Nano/micro‐sized Calcium Phosphate Coating on Carbon/carbon Composites by Ultrasonic Assisted Electrochemical Deposition

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

The Preparation and Biological Evalution of Hydroxyapatite / Nanosilver Bioceramic Coating on Titanium Im-Plant Surface

Electrophoretic Deposition of Biomimetic Zinc Substituted Hydroxyapatite Coatings with Chitosan and Carbon Nanotubes on Titanium

Preparation and Characterization of the HA/MWCNTs Composites

[Hydroxyapatite bioactive coating on carbon/carbon composites]

Preparation and Characterization of Implanted Fe Catalyst in Hydroxyapatite Layer for Uniformly Dispersion Carbon Nanotube Growth

Preparation of Co-YSZ/HAp nano-composite coating on Ti substrate by electrochemical method