Abstract:The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K-ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and "green" gypsum wallboards, "green" carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.

A new method for measuring adsorption performance of formaldehyde on typical adsorbents

USING AN AIRTIGHT CHAMBER TO MEASURE THE PARTITION COEFFICIENT OF FORMALDEHYDE ON TYPICAL ADSORBENTS

A New Method for Determining the Initial Mobile Formaldehyde Concentrations, Partition Coefficients, and Diffusion Coefficients of Dry Building Materials

A Study on the Formaldehyde Emission Parameters of Porous Building Materials Based on Adsorption Potential Theory

A Novel Method for Measuring the Diffusion, Partition and Convective Mass Transfer Coefficients of Formaldehyde and VOC in Building Materials

Characterization and adsorption capacity of potassium permanganate used to modify activated carbon filter media for indoor formaldehyde removal

High-Performance Amino-Functional Graphene/Cnt Aerogel Adsorbent for Formaldehyde Removal from Indoor Air

A New Method for Determining the Formaldehyde Emission Characteristic Parameters of Building Materials: Single Airtight Emission Method

Control of formaldehyde emission from wood-based panels by doping adsorbents: optimization and application

A REGRESSION METHOD FOR MEASURING INITIAL MOBILE FORMALDEHYDE CONCENTRATION AND PARTITION COEFFICIENT OF DRY BUILDING MATERIALS

Adsorption of Formaldehyde on the Surface of Environmental Test Chamber

A Novel Method to Determine the Formaldehyde Emission Characteristic Parameters of Building Materials at Multiple Temperatures

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

C-History Method: Rapid Measurement Of The Initial Emittable Concentration, Diffusion And Partition Coefficients For Formaldehyde And Vocs In Building Materials

Adsorption of Formaldehyde in Air by Modified Fly Ash

Determination of Partition and Diffusion Coefficients of Formaldehyde in Selected Building Materials and Impact of Relative Humidity

Variable volume loading method: a convenient and rapid method for measuring the initial emittable concentration and partition coefficient of formaldehyde and other aldehydes in building materials.

Removal of Formaldehyde at Low Concentration Using Various Activated Carbon Fibers

Characteristics Of Activated Carbon Fiberson The Removal Of Indoor Formaldehyde

Preliminary Experimental Research of Metal-Organic Frameworks (mofs) for Formaldehyde Dynamic Adsorption

Conjugated Microporous Poly(aniline)s for Removal of Low-Concentration Formaldehyde