Abstract:Based on the rub-impact characteristics of aero-engine, the dynamic model of a dual-rotor system under rub-impact was established.The elastic deformation, contact penetration and elastic damping support during rub-impact between the casing and wheel disk were fully considered.The finite element model and its boundary conditions of a quayside gantry crane were established.The collision force and friction were calculated by utilizing the Hertz contact theory and Coulomb model, then the kinetic differential equation of rub-impact under dry rubbing status was derived.The first ten natural frequencies, the corresponding mode shapes and time-history of displacement responses were given based on the analysis of the modes and dynamic responses of the gantry crane system.The calculation and analysis above are helpful for preventing the gantry crane from working in resonant area and for keeping the oversize dynamic deformation under restraint, which can be applied in designing quayside gantry crane systems.Applying the variable step size fourth order Runge-Kutta method, the rub responses of the dual-rotor system were obtained.As for aero-engine, it may not be accessible to directly detect the displacement signals of the rotor system, and only the acceleration signals on the pedestal are easy to be acquiced.In order to analyse the bearing pedestal acceleration characteristics under rub-impact status, a dual-rotor system test rig was designed.Rub-impact experiments were carried out and the vibration acceleration signals collected from the bearing pedestal were analyzed by means of frequency spectrum and envelop analysis in order to extract the rubbing faults' characteristics.The results indicate that the doubling frequency and combination frequencies from two different exciting sources can be considered as the typical characteristics of rub-impact in aero-engines.The beat vibration usually becomes noticeable when the speed difference between the two dual-rotor speeds is less than 20% of the operating speeds.The results of the dynamic simulation are in accordance with the experiments, which verifies the effectiveness of the proposed rub-impact model of dual-rotor systems.

Characteristics of rub-impact AE signals in rotating machinery based on modal analysis

Experimental Analysis of Characteristic of AE and Vibration in Rotor Rub-impact Fault

Modal Analysis of Rubbing Acoustic Emission for Rotor-Bearing System Based on Reassigned Wavelet Scalogram

Feature Extraction of Rub-impact Acoustic Emission Based on Cluster Analysis

Rub-impact Acoustic Emission Signal Recognition of Rotating Machinery Based on Gaussian Mixture Model

Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing

Application Of Acoustic Emission Technique In Diagnostics Of Early Rubbing Fault

Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis

Study on the Diagnosis of Rub-Impact Fault Based on Finite Element Method and Envelope Demodulation

Research on minor rub-impact fault diagnosis methods based on EMD of vibro-acoustic signals

Research on EEMD in rub-impact fault diagnosis of rotor system

Feature Extraction of Rubbing Fault Based on AE Techniques

Experimental study on rubbing position locating for rotor-bearing system based on rubbing acoustic emission

Research on Feature Extraction Method Based on Rub-Impact Acoustic Emission Signals of Mechanical Seal End Faces

Research on Fault Diagnosis in Rotary Machinery Acoustic Emission SignalBased on Wavelet Fractal

Analysis and Identification of Rub-impact Fault between Rotor and Stator

Rubbing Characteristic Test Based on an Aeroengine Rotor-stator Testing Rig

Face Rub-Impact Monitoring of a Dry Gas Seal Using Acoustic Emission

Dynamics of rub-impact of dual-rotor systems and the experimental verification based on vibration accelerations measurement

Identification of Rotating Machinery Rub and Impact Fault Using Hurst Exponent and Approximate Entropy as Characteristic Parameters of Acoustic Emission

Automatic Localization of the Rotor-Stator Rubbing Fault Based on Acoustic Emission Method and Higher-Order Statistics