Abstract:Products with complex free-form surfaces, such as aerospace impellers and automotive engines, are typically manufactured with ball-end milling. The machined surface topography is critical to these key components’ performance in harsh environments. Accurate prediction of the machined surface topography is essential to obtaining the optimized process parameters to achieve the best possible surface quality. An improved Z-MAP method based on the sequential quadratic programming (SQP) algorithm is proposed for efficient ball-end milling surface topography simulation in this paper. Compared to the traditional Z-MAP method, this improved method does not discretize the cutter edge and does not require a strict time-step limit. At each simulation time interval, the workpiece surface grid points falling into the cutting-edge instantaneous sweep polygon are searched to reduce the computation scale. An optimization problem, which combines these grid points’ coordinates with the cutting-edge trajectory model, is established for the accurate cutting time and cutting-edge element. The SQP algorithm is used to solve this optimization problem due to its global search capability. The surface topography is then updated by comparing the height of the cutting-edge element with the corresponding grid point. Experimental results indicate that the simulated surface topography is consistent with the measured surface topography. The proposed method achieves the same level of accuracy as the traditional method while requiring less computing time. The proposed method for fast surface topography in ball-end milling shows potential in optimizing process parameters to guarantee the surface quality of critical components.

Surface Topography Predication in High-Speed End Milling of Flexible Milling System

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

Dynamic-based Simulation for Machined Surface Topography in 5-Axis Ball-end Milling

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Influence Factors of Surface Topography in Micro-Side Milling

Prediction of Surface Topography in Robotic Ball-End Milling Considering Tool Vibration

Modeling and Controlling of Surface Micro-Topography Feature in Micro-Ball-end Milling

Surface topography prediction in peripheral milling of thin-walled parts considering cutting vibration and material removal effect

Modeling and simulation of surface topography in five-axis ball end milling

An integrated machine-process-controller model to predict milling surface topography considering vibration suppression

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

Analysis Method for Surface Topography Model in High Speed MillingHardened Steel

Modelling of End-Milled Floor Surface Topography Considering System Vibration and Tool Deflection

A Unified Prediction Model of 3D Surface Topography in Face Milling Considering Multi-Error Sources

Analysis Method for Surface Topography Model in High Speed Milling Hardened Steel

3D bevel surface topography analysis and roughness prediction by considering the cutter-workpiece dynamic interaction

Systematic Study of the Prediction Methods for Machined Surface Topography and Form Error During Milling Process with Flat-End Cutter

An Improved Z-MAP Method Based on the SQP Algorithm for Fast Surface Topography Simulation of Ball-End Milling

Modeling and Simulation of Machined Surface Error in Micro-Ball-End Milling

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling