Abstract:Microstructured source and drain poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) electrodes are prepared onto spin‐cast C8‐BTBT‐C8 films using microcontact printing. Only the precise control of the pressure yields high structural quality of the deposited electrodes. The addition of multi‐walled carbon nanotubes to the PEDOT:PSS ink leads to a significant reduction of contact resistance thus optimizing charge‐carrier injection and device performance. Advances in organic materials manufacturing have enabled the creation of electronic devices using solution‐processing techniques by employing soluble materials with high conductivity grade. In this exploratory study, the use of micro‐contact for poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) polymer ink deposition as high‐quality structured electrodes for organic field‐effect transistors (OFETs) in top‐contact geometry is demonstrated. The optimized OFET's solution‐processed fabrication is a promising strategy to be realized in the simple, cost‐effective roll‐to‐roll manufacturing processes. The electrical performance of the fabricated devices is comparable to transistors with gold electrodes prepared via vacuum deposition, and even exceeding the values of the charge carriers' mobilities and featuring lower contact resistance (Rc), due to lower charge‐carrier injection barrier for carbon‐based organic electrodes. An addition of multi‐walled carbon nanotubes to the PEDOT:PSS decreases Rc even further, changing the work function for better energy alignment with semiconductor materials.

Fabrication and evaluation of solution-processed reduced graphene oxide electrodes for p- and n-channel bottom-contact organic thin-film transistors

Fully solution-induced high performance indium oxide thin film transistors with ZrOx high-k gate dielectrics

Vertical Organic Electrochemical Transistors for Complementary Circuits

Inkjet-Printed Organic Electrodes for Bottom-Contact Organic Field-Effect Transistors

C8‐BTBT‐C8 Thin‐Film Transistors Based on Micro‐Contact Printed PEDOT:PSS/MWCNT Electrodes

Reduced graphene oxide nanoribbon networks: a novel approach towards scalable fabrication of transparent conductive films.

Poly(3-hexylthiophene)-Based Organic Thin-Film Transistors with Virgin Graphene Oxide as an Interfacial Layer

Reduced Graphene Oxide Produced By Rapid-Heating Reduction And Its Use In Carbon-Based Field-Effect Transistors

Scalable Self-Assembled Reduced Graphene Oxide Transistors On Flexible Substrate

Scalable Processing of Low Voltage Organic Field Effect Transistors with a Facile Soft-Contact Coating Approach

Ultrahigh Mobility and Efficient Charge Injection in Monolayer Organic Thin-Film Transistors on Boron Nitride.

Characterization and Modeling of Reduced-Graphene Oxide Ambipolar Thin-Film Transistors

Modification of Gold Source and Drain Electrodes by Self-Assembled Monolayer in Staggered N- and P-Channel Organic Thin Film Transistors

Soft-Etching Copper and Silver Electrodes for Significant Device Performance Improvement Toward Facile, Cost-Effective, Bottom-Contacted, Organic Field-Effect Transistors.

Reducing contact resistance in bottom contact organic field effect transistors for integrated electronics

Inkjet Printed Fine Silver Electrodes for All-Solution-Processed Low-Voltage Organic Thin Film Transistors

Ultralow contact resistance in organic transistors via orbital hybridization

Electrostatically-sprayed carbon electrodes for high performance organic complementary circuits

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

On the Role of Contact Resistance and Electrode Modification in Organic Electrochemical Transistors

Solution-processed top-contact electrodes strategy for organic crystalline field-effect transistor arrays