Abstract:This paper introduces a current control method for permanent magnet synchronous motors (PMSMs) using a disturbance sliding mode observer (DSMO) in conjunction with a linear quadratic regulator (LQR). This approach enhances control performance, streamlines the tuning of controller parameters, and offers robust optimal control that is resistant to system disturbances. The LQR controller based on state feedback is advantageous for its simplicity in parameter adjustment and achieving an optimal control effect easily under specific performance indicators. It is suitable for the optimal control of strong linear systems that can be accurately modeled. However, most practical systems are difficult to model accurately, and the time-varying system parameters and existing nonlinearity limit the engineering application of LQR. In the PMSM current control loop, there is strong nonlinear disturbance manifesting as the nonlinearity of its dynamic model. Additionally, substantial noise and variations in system parameters within actual motor circuits hinder the linear quadratic regulator from attaining optimal performance. A disturbance sliding mode observer is proposed to enhance the LQR controller, enabling superior performance in nonlinear current loop control. Simulation and actual hardware experiments were conducted to verify the performance and robustness of the control scheme proposed in this paper. Compared with the widely used PI controller in engineering and sliding mode control (SMC) specialising in disturbance rejection, it offers the advantage of straightforward parameter tuning and can swiftly achieve the robust and optimal control performance that engineers prioritize.

A Study on the Torsional Vibration Control of Motor-Transmission Integrated Drive System

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

Sliding Mode Control Based on Linear Quadratic Regulator for an Active Magnetic Bearing Flexible Rotor Virtual Collocated System

Active control and simulation test study on torsional vibration of large turbo-generator rotor shaft

A disturbance-observer-based feedforward-feedback control strategy for driveline launch oscillation of hybrid electric vehicles considering nonlinear backlash

Master-slave synchronous control method for attenuating dual mode electromechanical transmission system torsional vibration

A Disturbance Sliding Mode Observer Designed for Enhancing the LQR Current-Control Scheme of a Permanent Magnet Synchronous Motor

Mechanical Resonance Suppression And Disturbance Rejection Of 2-Inertia System With Observer-Based Feedback Control

Partial Control of the Torsional Vibration of a Turbogenerator Shaft System Based on Stability Regulate

Fault-Tolerant Control Based on State Observer and Optimal Allocation for Four-Wheel Independent Drive Electric Vehicle

Mechanical resonance suppression strategy based on shaft torque amplitude limiting control

Robust Vibration Control for Active Suspension System of In-Wheel-Motor-Driven Electric Vehicle via μ-Synthesis Methodology

Vibration Suppression of Hub Motor-Air Suspension Vehicle

Dynamic optimization of tracked vehicle power train based on torsional vibration analysis

Observer-Based Active Control of Torsional Vibration for Large Turbine-Generator Shaft System

Research on the Anti-Shuffle Control for Hybrid Electric Vehicles in the Pure Electric Mode

Research on Intelligence Torque Control for the Electrical Variable Transmission Used in Hybrid Electrical Vehicle

ACTIVE CONTROL SIMULATION OF TORSIONAL VIBRATION FOR TURBINE-GENERATOR SHAFT SYSTEM BASED ON GLOBALLY OPTIMAL CONTROL ALGORITHMS OF QUADRATIC REGULATOR

Modeling and active control of power-split hybrid electric vehicle launch vibration

Study on the torsional vibration of a hybrid electric vehicle powertrain with compound planetary power-split electronic continuous variable transmission