Abstract:A Satellite Attitude Dynamics Simulator is a low-cost, ground-based system made to simulate the conditions of a weightless satellite in space. The identification of the mass characteristics is crucial for Satellite Attitude Dynamics Simulator application and so the center of mass place is necessary for balancing the platform and moment of inertia which is a significant factor in designing controllers and selecting actuators. The purposes of this paper are the mass properties identification and design, experimentation, and validation of an automatic mass balancing system, which is assembled on the Satellite Attitude Dynamics Simulator at the Space Research Laboratory. This paper presents a process of mass properties estimation for the Satellite Attitude Dynamics Simulator using classical Levenberg–Marquardt as an optimization method. By employing this technique lack of repeatability and difficulties in implementation will be eliminated. In order to verify this technique, a MATLAB® SIMULINK® model of the Satellite Attitude Dynamics Simulator is established. The gap between the center of mass and center of rotation is decreased by means of the automatic mass balancing system in order to remove gravity disturbance. The results of this identification process are compared to the recursive least square algorithm, which is commonly employed in identification of mass properties. The analytical and experimental results prove that the proposed characteristic estimation process using classical Levenberg–Marquardt algorithm is more effective and appropriate. Proper excitation of the platform will guarantee the accuracy of estimation and compensation of the center of gravity offset utilizing the balancing system.

Research on a New Type of Center of Mass Measuring Instruments

Novel Measurement Method for Determining Mass Characteristics of Pico-Satellites

Research on Testing Method of the Rotary Inertia of the Three-axis Air Bearing Testbed

Mass properties identification and automatic mass balancing system for satellite attitude dynamics simulator

Research on Flexible Centroid Measurement Method for Segments of Large-Thrust Carrier Rocket

Mass and Center of gravity measurement of large size revolving bodies and error separation method

Astronaut Mass Measurement Using Linear Acceleration Method and the Effect of Body Non-Rigidity

THE EFFECT OF DISPLACEMENT OF MASS CENTER ON THE ATTITUDE OF SMALL SATELLITES

Design Realization and Error Analysis of Mass Measurement and Centroid Localization System for Missiles

Design of mass property integration measurement system for large size non-rotating bodies

Least squares estimation of in-orbit mass center position of the electrostatic accelerometer

A Structure for Accurately Determining the Mass and Center of Gravity of Rigid Bodies

Mass and mass center identification of target satellite after rendezvous and docking

A Flexible Measurement Technique for Testing the Mass and Center of Gravity of Large-Sized Objects

Research on the Pose Error Compensation Technology for the Mass and Centroid Measurement of Large-Sized Aircraft Based on Kinematics

Research on 6-DOF Dynamic Modeling for Centroid Alterable Experimental Object in Spacecraft Experiment Environment of Neutral Buoyancy

General Mass Property Measurement Equipment for Large-Sized Aircraft

An Efficient Approach of Centroid Alignment for Spaceflight Vehicles Considering Parameter Uncertainties

Experimental research for flexible satellite dynamic simulation on three-axis air-bearing table

Automatic Mass Balancing of a Spacecraft Three-Axis Simulator: Analysis and Experimentation

Dynamic Modeling for Automatic Balancing System of 3-DOF Air-bearing Test-bed