Abstract:Purpose The three-axis simulator relies on the air film between the air bearing and the bearing seat to achieve weightlessness and the frictionless motion condition, which is essential for simulating the micro-disturbance torque of a satellite in outer space. However, at the beginning of the experiment, the disturbance torque caused by the misalignment between the center of gravity of the simulator and the center of rotation of the bearing is the most important factor restricting the use of the space three-axis simulator. In order to solve this problem, it is necessary to set the balance adjustment system on the simulator to compensate the disturbance torque caused by the eccentricity. The paper aims to discuss these issues. Design/methodology/approach In this paper, a study of L1 adaptive automatic balancing control method for micro satellite with motor without other actuators is proposed. L1 adaptive control algorithm adds the low-pass filter to the control law, which in a certain sense to reduce the high-frequency signal and speed up the response time of the controlled system. At the same time, by estimating the adaptive parameter uncertainty in object, the output error of the state predictor and the controlled object can be stabilized under Lyapunov condition, and the robustness of the system is also improved. The automatic balancing method of PID is also studied in this paper. Findings Through this automatic balancing mechanism, the gravity disturbance torque can be effectively reduced down to 10 −6 Nm, and the automatic balancing time can be controlled within 7 s. Originality/value This paper introduces an automatic balancing mechanism. The experimental results show that the mechanism can greatly improve the convergence speed while guaranteeing the control accuracy, and ensuring the feasibility of the large angle maneuver of spacecraft three-axis simulator.

Research on Testing Method of the Rotary Inertia of the Three-axis Air Bearing Testbed

Research on testing technology based on three-axis diagonal integration of fiber-optic gyro

Analysis and Experimental Test on Dynamic Characteristic of 3-Axis Positioner System

Research on three axis air bearing platform simulation system for small satellite attitude control

Error impact analysis and experimental research for absolute testing of spherical surfaces

Research on Physical Simulation Experiments for Satellite Multi-axis Pointing Control

Experimental research for flexible satellite dynamic simulation on three-axis air-bearing table

Characterizing an Air-Bearing Testbed for Simulating Spacecraft Dynamics and Control

START: A Satellite Three Axis Rotation Testbed

IAC-15,E2,2,4,X31653 3-DOF GAS BEARING SIMULATOR FOR SMALL SATELLITE TESTS WITH AUTOMATED MASS DISPLACEMENT CONTROL TO ELIMINATE DISTURBANCE TORQUES

Three-axis air-bearing based platform for small satellite attitude determination and control simulation

A study of PID and L1 adaptive control for automatic balancing of a spacecraft three-axis simulator

A Robotic Testbed for Positioning and Attitude Accuracy Test of Space Manipulator

Development of a Low-Cost Satellite Three-Axis Attitude Simulator Testbed

STUDY ON HIGH ACCURACY BALANCING METHODS FOR HUGE ROTOR

Rapid development of air bearing three-axis stabilized satellite

Method of Coupling Testing Angular Momentum Based on Air Spindle Testbed

Design and Demonstration for an Air-bearing-based Space Robot Testbed

Real-time Testing System for Attitude Control Software of Micro-Nano Satellite