Abstract:To further enhance the crashworthiness of subway vehicle anti-climb energy-absorbing devices, this paper proposes a novel collapsible structure, which is embedded with honeycomb aluminum blocks and consists of an inner and outer double-layer square tube. An impact finite element model of the subway vehicle’s anti-climb energy-absorbing device was established using LS-DYNA (v.17.2). The effects of the connecting diaphragm thickness, the inner and outer tube thicknesses of the thin-walled tubes, and the yield strength of the honeycomb aluminum on the energy absorption and impact force of the anti-climb energy-absorbing device were investigated. The results indicate that changes in the inner and outer tube thicknesses of the thin-walled tubes significantly affect the energy absorption and impact force of the anti-climb energy-absorbing device. However, changes in the connecting diaphragm thickness only increase the maximum energy absorption by up to 7.5% but have a significant impact on the maximum peak force. It was also found that the difference in energy absorption due to changes in the yield strength of the honeycomb aluminum is only 3.6%, suggesting that the yield strength of the honeycomb aluminum and the connecting diaphragm thickness have a limited influence on the crashworthiness design of the anti-climb energy-absorbing device. Furthermore, a multi-objective surrogate model characterizing the specific energy absorption and maximum peak force was established for the aforementioned four influential parameters using the response surface method. The model was then optimized using a genetic algorithm, resulting in optimal parameters that increased the energy absorption and specific energy absorption by 27.3% and 13.8%, respectively, compared to the original values, leading to a significant improvement in crashworthiness. The findings provide valuable references for and insights into the crashworthiness design and optimization of subway vehicles’ anti-climb energy-absorbing devices.

An Anti-Collision Device with Circumferentially Energy Absorption under A Local Impact

Impact Analysis and Absorber Design for Collision Protection of Part-Buried Structures

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

A Flexible, Reusable and Adjustable High-Performance Energy Absorption System Inspired by Interlocking Suture Structures

An on-demand tunable energy absorption system to resolve multi-directional impacts

Architected lattices with adaptive energy absorption

Design and Research of Anti-collision Device Based on Stiffness Matching

A novel self-locked energy absorbing system

Design of a Conceptual Bumper Energy Absorber Coupling Pedestrian Safety and Low-Speed Impact Requirements

Experiments and design of a kirigami-based multi-stage energy absorption structure subjected to axial impact

Study of the factors influencing load displacement curve of energy absorbing device by area division simulation

The Offset Crashworthiness and Parameter Optimization of C-Shaped Frame for Rail Vehicle Anti-Climbing Device

Design and Experimental Verification of Composite Impact Attenuator for Racing Vehicles

Improved Energy Absorption Characteristics Based on Elastic Polymer-Modified Porous Material for Multiple Extreme Mechanical Impacts

An Exploration of Dynamic Anti-collision Properties of Heterogeneous Metal Sandwich Board

Design, simulation and experiment study of a snap-fit spatial self-locking system for energy absorption

Energy-absorption Behavior of Metallic Hollow Sphere Structures under Impact Loading

A concave-convex design strategy for periodic self-locked energy-absorbing systems

Research on New Flexible Bridge Pier Anti-collision Technology

Impact resistance of bridge columns with energy-absorbing crash dampers under vehicle collisions

Energy Absorption Characteristics and Parameter Optimization of Anti-Climb Energy-Absorbing Devices for Subway Vehicles under Impact Loads