Abstract:Airbags have been widely used in passenger vehicles to protect occupants from vehicle collisions. Although the airbag is an advanced protective device, it has been continuously improved to minimise occupant injuries for true safety. The current study developed a new sandwiched tube-type airbag (STAB) consisting of two flat layers and a middle layer with a tube-type structure. The objective of designing this new type of airbag is to enhance occupant safety in passenger car collisions by reducing injury risks for small and out-of-position (OOP) occupants. A prototype of the new airbag was built using a volume of 40 L. The performance of the prototype airbag was investigated using static deployment test and sled crash test with a Hybrid III dummy. A finite element model of the new airbag was developed and validated using results from the airbag deployment test and sled crash test. A parametric study and STAB optimisation were subsequently conducted to study the influence of eight design variables on STAB. The design of experiment (DOE) was used to generate the virtual test matrixes; results were analysed to determine significant design variables and STAB's protective efficiency. A series of virtual tests involving the OOP occupant and STAB airbag as well as the normal driver-side airbag (DAB) were conducted with a 5th percentile female dummy and a 50th percentile male dummy. Results indicated that the STAB airbag needs less gas than the DAB to get the same load and displacement curve. In the deployment process, STAB's leading velocity was lower than that of DAB's. Thus, STAB could decrease the risk of OOP occupant's injury and provide better protection performance.

Study on Cushioning Characteristics of Soft Landing Airbag with Elastic Fabric

Cushioning properties of two-layered cushioning structure stacked by honeycomb and calcium plastic board subj ected to quasi-static compressive loadings

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Dynamic Modeling and Simulation for Pneumatic Landing Airbag System with Frictional Contact

Multi-Objective Optimization Design of an Origami-Inspired Combined Cushion Airbag

Study on Impact Energy Absorption and Adhesion of Biomimetic Buffer System for Space Robots

Modelling and simulation of a sandwiched tube-type airbag and its optimization using design of experiments

Numerical and experimental investigations on the behaviour of the sandwiched tube-type airbag

Research on Computer Simulation of Large Cubage Airbag

Mechanism Analysis of Airbag Explosion Suppression and Energy Absorption in a Flexible Explosion Suppression System

Crashworthiness Design Optimization for an Evtol Aircraft.

Experimental Research and Numerical Simulation on Static Deformation of Gasbag with Textile Reinforced Composite Lining

Nonlinear Dynamic Analysis of Series Cushioning System Made with Expanded Polyethylene and Corrugated Paperboard

Numerical modelling and experimental analysis of the passenger side airbag deployment in out-of-position

A study on energy absorption panel of bumper based on impact of pedestrian's lower leg

Drop Simulation Analysis of Plant Fiber Cushion Packaging Based on ANSYS

Accuracy Evaluation of the Coupled Eulerian-Lagrangian Method in Abaqus/Explicit Using a Passenger Airbag Model

Impact-response analysis of the system composed of critical component and EPE cushion

A Study on the Correlation Between Airbag Folding Patterns and the Injury of Out-of-Position Occupants

Establishment of buffer dynamic model for polyethylene foam cushion

Development of a Crash Cushion Utilising Waste Tires as an Impact Absorber