Abstract:Objective Cold rolled strips are widely employed in automobiles, home appliances and other industries, and their surface micromorphology affects the surface chromatic aberration of the strip steel. The strip steel surface with regularly distributed microstructure tends to exhibit alternative bright and dark fringes. When the microstructure is randomly distributed, the stripes caused by multi-beam interference will be weakened. The surface microstructure of the rolled strip corresponds to that of the roll surface. The disordered roll laser texturing technology features less pollution, a wide range of texturing roughness, and high surface hardness, which can reduce the surface chromatic aberration of the rolled strip and is expected to meet the growing demand for sound stamping performance and fine brightness after the painting of cold rolled sheet productions. Methods The laser texturing roller technology is presented for controlling the range of peak per inch (PPI) density and roughness of rolling rolls based on the offset phase difference of the random distribution. The formation mechanism of light and dark alternately stripes on the surface of rolled strip steel is analyzed using the multi-beam interference principle. By the ray tracing method, the random distribution phase difference generated by the offset of equally spaced convex microstructures is studied to weaken the interference fringes formed by single-wavelength reflected light on the surface of rolled strip steel, which thus eliminates Moire fringes generated by multiple wavelengths. The reflected coherent irradiance is adopted to study the corresponding uniform distribution function characteristic parameters under different center spacing when the interference fringes are broken. Meanwhile, laser impact pit experiments are conducted on roll material samples to obtain the corresponding relationship between the textured pit morphology and laser impact conditions. The random deviation of the pit microstructure on the roll surface is the same as that of the convex microstructure on the rolling strip by attenuating copying. We utilize Matlab's pseudo-random number generator based on the linear congruence method to generate two sets of random arrays that obey the uniform distribution obtained from the simulation analysis. Disordered texturing is performed on the rolling roll material sample by laser impact, which is achieved by adopting deviation in the convex microstructure center distance following a uniform distribution by theoretical and simulation analysis. Results and Discussions When the center offset of the microstructure on the surface of the rolled strip steel obeys a uniform distribution function, the coherent irradiance disorder of the single wavelength reflected light of the microstructure is better (Fig. 2). When the interference fringes of the reflected light from the tabular microstructure are broken, different center spacing corresponds to various characteristic parameters of the uniform distribution function (Fig. 3). Conclusions By employing the uniform distribution function of pit center offset obtained from theoretical and simulation analysis, and the relationship between experimentally obtained laser parameters and pit morphology, the surface of a roll material sample with a roughness of 3.79 mu m and PPI of 179 is experimentally realized as disordered laser texturing of the roll material sample in a small area of 10 mmx10 mm by laser texturing technology (Fig. 5).

Control of Surface Roughness for R2 Grade Tin Mill Black Plate in Two-Stand Temper Mill Rolling

Elongation Control of the Ultra-Thin Tinplate During Two-Stand Temper Rolling Unsteady Process

Shape and Crown Control Strategy for PC Mill

Adaptive Pass Scheduling for Roughness Control in Cold Rolling

Study on Fixed Grooves Rolling Process for TC4 Titanium Alloy Angle Section Profiles

Research on the generation and control of high-order flatness during the controlling of titanium strip profile by the intermediate taper roll in a 20-high mill

Technology of rolling with single groove for GH4169 profiled section

A Novel Strategy Based on Machine Learning of Selective Cooling Control of Work Roll for Improvement of Cold Rolled Strip Flatness

Surface Roughness Micro-Deformation and Transfer of Bulk Steel in Hot Rolling

Tapered Heavy Reduction Technology for Plate Mill

Surface Roughness Transformation and Deformation of the Scale in Hot Rolling

Roll Laser Texturing Technology Based on Uniformly Randomly Distributed Offset Phase

Advance on surface finishing technology of precision bearing cylindrical rollers

DEVELOPMENT IN PROFILE AND FLATNESS CONTROL SYSTEM OF HOT STRIP MILLS

Production and Quality Control of Base Plate for Cold Rolling in Masteel

Temper Mill Control in Continuous Annealing Processing Line of Baosteel

Strip Thickness and Profile–Flatness Prediction in Tandem Hot Rolling Process Using Mechanism Model‐Guided Machine Learning

Practice of Controlled Rolling Process for Ribbed Bar

Surface plastic deformation distribution and microstructural evolution in the compound rolling of Ti–50Al billet

Steel Surface Roughness Parameter Calculations Using Lasers and Machine Learning Models

Spread Model for TC4 Alloy Rod During the Three-Roll Tandem Rolling Process