Abstract:Ventilated cavitating flows are investigated via direct numerical simulations, using a coupled level set and volume of fluid method to capture the interface between the air and water phases. A ventilated disk cavitator is used to create the cavity and is modelled by a sharp-interface immersed boundary method. The simulation data provide a comprehensive description of the two-phase flow and the air leakage and vortex shedding processes in the cavitating flow. The mean velocity of the air phase suggests the existence of three characteristic flow structures, namely the shear layer (SL), recirculating area (RA) and jet layer (JL). The turbulent kinetic energy (TKE) is concentrated in the JL in the closure region, and streamwise turbulent fluctuations dominate transverse fluctuations in both SL and JL. Budget analyses of the TKE show that the production term causes the TKE to increase in the SL due to the high velocity gradients, and decrease in the JL due to streamwise stretching effects. Air leakage and vortex shedding occur periodically in the closure region, and the one-to-one correspondence between these two processes is confirmed by the velocity and volume fluid spectra results, and the autocorrelation function of the air volume fraction. Moreover, the coherent flow structures are analysed using the spectral proper orthogonal decomposition method. We identify several fine coherent structures, including $SL_{KH}$ induced by the Kelvin–Helmholtz instability, $SL_{out}$ associated with large-scale vortex shedding, $SL_{in}$ associated with small-scale vortex shedding, and $SL_{r}$ associated with upstream turbulent convection. The present study complements previous research by providing detailed descriptions of the turbulent motions associated with the violent mixing of air and water, and the complex interactions between different characteristic structures in cavitating flows.

Simulation On Flow Field Induced By Vibration Surface Of Low Frequency

Study on Fluid-Solid Coupling Dynamic Characteristics of Large Wide-Frequency-range Underwater Vibration Tables

Study on the vertical oscillatory gas-liquid two-phase flow and heat transfer characteristics

Numerical simulation of flow-induced vibration on two circular cylinders in a cross-flow (Part I: Transverse y-motion)

Numerical Simulation of Flow-Induced Vibration on Two Circular Cylinders in Tandem Arrangement

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

A numerical simulation of VIV on a flexible circular cylinder

Experimental Study on Interfacial Area Transport of Two-Phase Flow under Vibration Conditions

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Simulation of the Ultrasonic Cavitation Process of the Double-Bubble

Flow Pattern Change in a Vertical Tube for the Liquid Film Suction

Simulation on forced system of two cylinders using virtual boundary method

Simulation Of The Flow Condition Near The Intake Of A Pump Sump

Ultrasonic oscillatory two-phase flow in microchannels

Simulation-based Study of Low-Reynolds-number Flow Around a Ventilated Cavity

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Numerical simulation of pipeline ultrasonic cavitation based on CFD

Investigation of Vibration Amplitude Effect on Local Flow Parameters of Two Phase Flow

Experimental and numerical investigations on the flow-induced vibration and acoustic radiation of a pump-jet propulsor model in a water tunnel

Effect of pulsating flow on flow-induced vibrations of circular and square cylinders in the laminar regime