Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Numerical Simulations of Bubble Formation and Acoustic Characteristics from a Submerged Orifice: the Effects of Nozzle Wall Configurations

Acoustic analysis on jet-bubble formation based on 3 D numerical simulations

Cfd Simulation of Bubble Dynamics in Bubble Columns with Internals

Active Acoustic Measurement of Sound Speed for Quantifying Underwater Gaseous Bubble Emissions

Numerical Simulation of Nonlinear Phenomena in a Standing-Wave Thermoacoustic Engine with Gas-Liquid Coupling Oscillation

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Experimental Study on Asymmetric Bubbles Rising in Water: Morphology and Acoustic Signature

Numerical Investigation of Multi Rising Bubbles Using a Coupled Level Set and Volume of Fluid (CLSVOF) Method

Numerical Study of the Kinematic and Acoustic Characteristics of Bubble Clusters

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Simulation of the Ultrasonic Cavitation Process of the Double-Bubble

A new approach of acoustic characteristics analysis in jet-bubble noise

Numerical simulation on motion of bubble under water

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Direct numerical simulation of deformable rising bubbles at low Reynolds numbers

Passive acoustic imaging for jet bubbles

Numerical Study of the Collapse of Multiple Bubbles and the Energy Conversion During Bubble Collapse

Numerical Simulation of Hydrodynamic Noises during Bubble Rising Process

Numerical investigation on acoustic cavitation characteristics of an air-vapor bubble: Effect of equation of state for interior gases

Numerical simulations of bubbly flows in a vertical periodic channel