Abstract:Most present demonstrations of high-temperature superconducting (HTS) synchronous motors/generators are partially superconducting, only installing HTS coils on the rotor as excitation windings. The possible applicability of HTS armature windings is an interesting research topic because these windings can certainly increase the power density attributed to a potentially high armature loading capacity. In this study, we analysed the thermal behaviours of a developed 2.5 kW–300 rpm synchronous generator prototype that consists of an HTS stator with Bi-2223–Ag armature windings on an iron core and a permanent magnet (PM) rotor. The entire HTS stator, including the iron core, is cooled with liquid nitrogen through conduction cooling. The rated frequency is set at 10 Hz to reduce AC loss. The properties of the HTS windings and the iron core are characterized, and the temperatures in the HTS stator under different operation conditions are measured. The estimated iron loss is 11.5 W under operation in 10 Hz at liquid nitrogen temperature. Conduction cooling through the silicon iron core is sufficient to cool the iron core and to compensate for the temperature increment caused by iron loss. The stable running capacity is limited to 1.6 kW when the armature current is 12.6 A (effective values) due to the increasing temperature in the slots as a result of the AC loss in the HTS coils. The thermal contact between the HTS coils and the cooling media should be improved in the future to take away the heat generated by AC loss.

Thermal analysis of high speed PM generator used for distributed generation system

Thermal Analysis of a Permanent Magnet Generator with Built-in Hydrostatic Drive

Analysis of Magnetic-Thermal Coupled Fields in the End Region of Large Turbine-Generators

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Optimization Design of a Permanent Magnet Synchronous Generator for a Potential Energy Recovery System

The Electromagnetic Field Analysis of Permanent Magnet Synchronous Generator Based on ANSYS

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Thermal Analysis of an Interior Permanent Magnet Synchronous Traction Motor for High Speed Railway Applications

Thermal Analysis and Experimental Validation of a 30 kW 60000 r/min High-Speed Permanent Magnet Motor With Magnetic Bearings

Simulation and Test for the Thermal Behaviour of a Prototype Synchronous Generator with HTS Armature Windings

Design and analysis of a novel hybrid cooling method of high-speed high-power permanent magnet assisted synchronous reluctance starter/generator in aviation applications

The dynamic performance and temperature distribution of turbine generator under loss of excitation by using coupled FE analysis

Design and Analysis of Tubular Linear PM Generator

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Design of A 10 Mw Dual-Stator Superconducting Permanent Magnet Wind Power Generator

Rotor Stress and Dynamics Analysis of a High-Speed Permanent Magnet Machine for a Micro Gas Turbine Considering Multiphysics Factors

Mechanical Analysis With Thermal Effects for High-Speed Permanent-Magnet Synchronous Machines

Analytical Multi-element Rotor Thermal Modelling of High-speed Permanent Magnet Motors Accounting for Retaining Sleeve

Thermal Analysis for the Hts Stator Consisting of Hts Armature Windings and an Iron Core for A 2.5 Kw Hts Generator

Thermal Analysis of Water-Cooling Permanent Magnet Synchronous Machine for Port Traction Electric Vehicle