Abstract:This paper develops a one-dimensional simulation model of a thermoelectric module aiming at its characteristic exploration and output performance prediction. Almost all related effects are considered including Seebeck, Peltier, Thomson effects, the spatial- and temperature-dependent thermoelectric material properties, as well as the other irreversible factors. In order to ensure its high accuracy and computational efficiency, the differential equations built for components of non-linear physical properties, and analytical equations for the others of constant properties are jointly solved by numerical methods and implemented in MATLAB integrated development environment. A small deviation of 1.44% exists between its calculated output power and that by a previously reported three-dimensional model under a specific wide load range (0-250 Omega), validating its accuracy of this model. Besides, it indicates that both the proportions of heat leakage through the occupied air zone and its maximum output power to the input total heat flow have the same order of magnitude. A rising proportion for the former has to be paid attention in case of a higher temperature difference applied. The assumption of regarding its electrical contact resistance as an identical external resistance connected with the load in series is computationally proved to generate a negligible discrepancy in terms of TEM characteristics and its output performance. Furthermore, with respect to the impacts of TEM geometry, the pre-set fixed substrate area weakens the equivalence of regarding a thermoelectric module with larger cross-section area of thermoelectric legs as multiple identical modules with smaller leg areas connected in parallel. It accounts for the better linearity of rising output power by a long leg than that by a short leg as the leg area increases. A long thermoelectric leg means an increased induced electrical potential and inner resistance as well, thus leading to a single peak of the output power as the leg length increases. Finally, a thermoelectric geometric optimization approach abased on the Hill-climbing algorithm is introduced and first applied for the maximum output. Its accuracy and efficiency are validated and analyzed detailedly by supplying different variables as initial search point. All the methods and conclusions in this paper can assist thermoelectric generators' performance estimation and guide the geometric optimizations regarding their large-scale applications in the future.

Modeling and verification of a thermoelectric energy scavenger

An Efficient Electrothermal Model of a Thermoelectric Converter for a Thermal Energy Harvesting Process Simulation and Electronic Circuits Powering

An Approximate and Efficient Characterization Method for Temperature-Dependent Parameters of Thermoelectric Modules

Elucidating modeling aspects of thermoelectric generator

Modeling of Thermoelectric Generators with Effects of Side Surface Heat Convection and Temperature Dependence of Material Properties

Comprehensive Modeling for Geometric Optimization of a Thermoelectric Generator Module

A Physical Model for Thermoelectric Generators With and Without Thomson Heat

Design and Research of Thermoelectric Generator Simulation System for Boiler Flue Gas Waste Heat

Designing thermoelectric self-cooling system for electronic devices: Experimental investigation and model validation

Recent advances in modeling and simulation of thermoelectric power generation

Modeling and performance analysis of a two-stage thermoelectric energy harvesting system from blast furnace slag water waste heat

Study on a Dual-Function Thermoelectric Cooler-Thermoelectric Generator System

A Model to Evaluate the Device-Level Performance of Thermoelectric Cooler with Thomson Effect Considered

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

Harvesting Solar Thermal Energy With a Micro-gap Thermionic-Thermoelectric Hybrid Energy Converter: Model Development, Energy Exchange Analysis, and Performance Optimization

Analytical Model for Multi-stage Thermoelectric Generator with Series and Parallel Connection

Modeling and performance/sensitivity analysis of a thermally regenerative electrochemical refrigerator powered by thermoelectric generator

Simulation Research On The Application Of Thermoelectric Waste Heat Recovery Of Internal Combustion Engine

Numerical Simulations on the Temperature Gradient and Thermal Stress of a Thermoelectric Power Generator

Study of Different Heat Exchange Technologies Influence on the Performance of Thermoelectric Generators

Model development and preliminary study of the concentrated-radiative cooling based thermoelectric generator