Abstract:The existing pump-stopping pressure drop models for the hydraulic fracturing operation of tight oil reservoirs only consider the main hydraulic fracture and the single-phase flow of fracturing fluid. In this paper, a new pump-stopping pressure drop model for fracturing operation based on coupling calculation of the secondary fracture and oil-water two-phase flow is proposed. The physical model includes the horizontal wellbore, the fracture network and the tight oil reservoir. Through the numerical simulation and calculation, the wellbore afterflow performance, the crossflow performance between the main hydraulic fracture and the secondary fracture, the fracturing fluid leakoff and the oil-water replacement after termination of pumping are obtained. The pressure drop characteristic curve is drawn out by the bottom-hole flow pressure calculated through the numerical simulation, and a series of analyses are carried out on the calculated pressure drop curve, which is helpful to diagnose the -oil-water two-phase flow state and the fracture closure performance under the control of the fracture network after hydraulic fracturing pumping. Finally, taking a multi-stage fractured horizontal well in a tight oil reservoir in the Junggar basin, China as an example, the pump-stopping pressure drop data of each stage after hydraulic fracturing are analyzed. Through the history fitting of the pressure drop characteristic curve, the key parameters such as fracture network parameters, which include the half-length of main hydraulic fracture, the conductivity of main hydraulic fracture and the density of secondary fracture, the fracture closure pressure are obtained by inversion, thus, the hydraulic fracturing effect of fractured horizontal well in tight oil reservoirs is further quantified.

THE ROOF BOLT MECHANIC ANALYSIS OF THE PIPELESS HYDRAULIC-FEEDBACK-TYPE PUMPING TECHNOLOGY

Flow characteristics simulation and low-noise design of fuel piston pump

Design of New Hydraulic Pumping Unit with Electro-hydraulic Proportional Control

Analysis on dynamic experimental system of lubrication film properties of friction pairs in axial piston pump

Experimental Research on Performance of Water Hydraulic Internal Gear Pump

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Hydraulic System Design and Simulation of the Forging Manipulator

Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Research Of Measuring Method On The On-Line Output-Of Concrete Pump

Investigation Into The Effects Of Index Angle On Fluidborne Noise And Structureborne Noise Of A Tandem Axial Piston Pump

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Multi-objective Optimization of Surface Texture for the Slipper/swash Plate Interface in EHA Pumps

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

The Optimization of A Low Specific Speed Pipeline Pump

Flow-Induced Dynamic Behavior of Head-Cover Bolts in a Prototype Pump-Turbine During Load Rejection

Energy-saving mechanism research on beam-pumping unit driven by hydraulics

Model and Analysis of Pump-Stopping Pressure Drop with Consideration of Hydraulic Fracture Network in Tight Oil Reservoirs