Abstract:This study was designed to develop and characterize a silica-coating method for crystalline nonsilicate ceramic nanoparticles (Al2O3, TiO2, and ZrO2). The hypothesis was that the coated nonsilicate nanoparticles would stably reinforce a polymeric matrix due to effective silanation. Silica coating was applied via a sol-gel method, with tetraethyl orthosilicate as a silica precursor, followed by heat treatment. The chemical and microstructural characteristics of the nanopowders were evaluated before and after silica coating through x-ray diffraction, BET (Brunauer-Emmett-Teller), energy-dispersive x-ray spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy analyses. Coated and noncoated nanoparticles were silanated before preparation of hybrid composites, which contained glass microparticles in addition to the nanoparticles. The composites were mechanically tested in 4-point bending mode after aging (10,000 thermal cycles). Results of all chemical and microstructural analyses confirmed the successful obtaining of silica-coated nanoparticles. Two distinct aspects were observed depending on the type of nanoparticle tested: 1) formation of a silica shell on the surface of the particles and 2) nanoparticle clusters embedded into a silica matrix. The aged hybrid composites formulated with the coated nanoparticles showed improved flexural strength (10% to 30% higher) and work of fracture (35% to 40% higher) as compared with composites formulated with noncoated nanoparticles. The tested hypothesis was confirmed: silanated silica-coated nonsilicate nanoparticles yielded stable reinforcement of dimethacrylate polymeric matrix due to effective silanation. The silica-coating method presented here is a versatile and promising novel strategy for the use of crystalline nonsilicate ceramics as a reinforcing phase of polymeric composite biomaterials.

Characterization of Self-Assembled Nano-Phase Silane-Based Particle Coating

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Electrodeposited Silica Films Post-Treated with Organosilane Coupling Agent As the Pretreatment Layers of Organic Coating System

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 1: Corrosion Performance and Interfacial Property

Preparation and Tribological Behaviors of an Amide-Containing Stratified Self-Assembled Monolayers on Silicon Surface

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Effect of the Particle Size of Nanosilica on the Performance of Epoxy/silica Composite Coatings

Understanding the Role of Silane Pretreatments in an Organic Coating System. Part 2: a Study of Molecular Dynamics Simulation

CATHODICALLY ELECTROCHEMICAL-ASSISTED DEPOSITION AND PROTECTIVE PROPERTIES OF SILANE FILMS

Preparation and Properties of Polysiloxane Coating Modified by Colloidal Silica

Preparation of a Novel Epoxy/SiO2 Hybrid Coating

Design and preparation of multiple silica particles and study on superhydrophobic modified epoxy resin

Preparation of a Novel Epoxy/SiO<sub>2</sub> Hybrid Coating

Studies on Self-Assembly of Methoxy Polyethylene Oxide Propyl Trimethoxysilane on Silicon Substrate

Investigations on the Impact of a Series of Alkoxysilane Precursors on the Structure, Morphology and Wettability of an Established Zirconium-Modified Hybrid Anticorrosion Sol–Gel Coating

The preparation and properties research of superhydrophobic organosilicone coating

Fabrication pentablock copolymer/silica hybrids as self-assembly coatings.

The synthesis of silica-polyacrylate nano-complex coating

Improving the formation and protective properties of silane films by the combined use of electrodeposition and nanoparticles incorporation

Preparation of Durable Hydrophobic and Antireflective Silica Coating

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials