Abstract:For a hybrid car equipped with dual clutch transmission (DCT), the coordination control problems of clutches and power sources are investigated while taking full advantage of the integrated starter generator motor's fast response speed and high accuracy (speed and torque). First, a dynamic model of the shifting process is established, the vehicle acceleration is quantified according to the intentions of the driver, and the torque transmitted by clutches is calculated based on the designed disengaging principle during the torque phase. Next, a robust H∞ controller is designed to ensure speed synchronisation despite the existence of model uncertainties, measurement noise, and engine torque lag. The engine torque lag and measurement noise are used as external disturbances to initially modify the output torque of the power source. Additionally, during the torque switch phase, the torque of the power sources is smoothly transitioned to the driver's demanded torque. Finally, the torque of the power sources is further distributed based on the optimisation of system efficiency, and the throttle opening of the engine is constrained to avoid sharp torque variations. The simulation results verify that the proposed control strategies effectively address the problem of coordinating control of clutches and power sources, establishing a foundation for the application of DCT in hybrid cars.

Control and Simulation of Launch with Two Clutches for Dual Clutch Transmissions

Research on Optimal Control for Dry Dual-Clutch Engagement During Launch

Micro Slip Control In Dual Clutch Transmission For Vehicle Launch

Wet Dual Clutch Launching Adaptive Control Considering Service Time

Research on Feedback Linearization Control of Dual-clutch for Dual Clutch Transmission

Investigation on Adaptive Method of Torque Characteristic in Dual Clutch Transmission During Launch Phase

Clutch Micro-Slip Control in Gearshifts for Dual Clutch Transmission

A Study on the Start Process Simulation of a Dual Clutch Automatic Transmission Based on Fuzzy Control

Research on simulating and modelling dynamics of double clutch transmission (DCT)

Micro-slip Control and Torque Estimation for Dual Clutch Transmission

Gearshift Control for Dry Dual-Clutch Transmissions

Engagement Control of Automated Clutch for Vehicle Launching Considering the Instantaneous Changes of Driver's Intention

Research on the Optimal Control of Working Oil Pressure of DCT Clutch Based on Linear Quadratics Form

Torque coordinating robust control of shifting process for dry dual clutch transmission equipped in a hybrid car

Multi-state control strategy of starting for a wet friction clutch via a fuzzy logic algorithm

Optimal control of dry clutch engagement based on the driver's starting intentions

Simulation Of Wet-Clutch Short-Time Load End Speed Control System On Amesim

Modelling of Dual Clutch Transmission System based on AMESim and Simulation by Simulink

Research on Engaging Process of Dry Dual-Clutch Based on Optimality Theory

Supervisor control strategy of synchronizer for wet DCT based on online estimation of clutch drag torque

Coordinated Clutch Slip Control for the Engine Start of Vehicles with P2-hybrid Automatic Transmissions