Abstract:With the decrease in transistor feature size, power consumption, especially leakage power, has become a most important design concern. Because of their superior electrical properties and design flexibility, fin-type field-effect transistors (FinFETs) seem to be the most promising option in low-power applications. In order to support the VLSI digital system design flow based on logic synthesis, this paper proposes a design method for low-power high-performance standard cells based on IG-mode FinFETs. Such a method is derived on the basis of appropriately and artfully designing and optimizing the stacked structures in each standard cell, and applying the mixed forward and reverse back-gate bias technique in a well-chosen manner. The proposed method is also applicable when the supply voltage reduces to 0.5V to further reduce the leakage power consumption. By applying this design method, optimized IG-mode FinFET standard cells are generated, and they form a low-power high-performance standard cell library. Simulation results of the library cells indicate that the performance of the standard cells designed with the proposed method can be maintained while reducing leakage consumption by a factor of 58.9 at most. The 16-bit ripple carry adder implemented with this library can acquire up to 17.5% leakage power reduction.

Design of a Sub-Threshold 32-Bit Datapath

A Threshold Control Technique for CMOS Comparator Design

Research on low power technology based on Multi Bit Flip Flop

Sub-threshold standard cell library design for ultra-low power biomedical applications

A Fast Computable Delay Model for Subthreshold Circuit.

Design of Low-Power High-Performance FinFET Standard Cells

Negative Design Margin Realization through Deep Path Activity Detection Combined with Dynamic Voltage Scaling in a 55 nm Near-Threshold 32-Bit Microcontroller

A Transistor-Level DFF Based on FinFET Technology for Low Power Integrated Circuits

Design of Low-Power D-flip-flop Based on Multithreshold Technique

Signal-Path-Level Dual-VT Assignment for Leakage Power Reduction

A 0.6v Standard Cell Library in 40nm Cmos for Near-Threshold Computing

Ultra Low Power Circuits Design Based on III-V Group Heterojunction Tunnel Field Effect Transistor

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

Design of a Novel Low Power 8-Transistor 1-Bit Full Adder Cell.

A Light-Powered Sub-Threshold Microprocessor

A Customized Low Static Leakage Near/Sub-threshold Standard Cell Library Using Thick-gate Transistors

Low Power High Performance FinFET Standard Cells Based on Mixed Back Biasing Technology.

Row-Based Dual Vdd Assignment, for a Level Converter Free CSA Design and Its Near-Threshold Operation

Signal-Path Level Assignment For Dual-V-T Technique

Development of TFET 0.13 Μm Standard Cell Library for Ultra-Low Power Applications.

Design of CMOS low-power pre-settable edge-triggered flip-flop based on multithreshold technique.