Abstract:As a new type of sensing element, fiber Bragg grating (FBG) has advantages of wavelength modulation, hightemperature resistance, and anti-electromagnetic interference. In this paper, a medium-frequency FBG accelerometer based on a symmetrical double-semicircle cantilever is designed and fabricated. In the sensor, the double-semicircle cantilever acts as the elastic element. FBG is suspended and pasted on the double-semicircle cantilever by its two ends. When the sensor is subjected to the external vibration, the free end of the double-semicircle cantilever will vibrate under the action of inertial force. Correspondingly, the FBG is driven to produce axial strain. The structure and working principle of the sensor are well illustrated, the natural frequency and sensitivity of the sensor are analyzed as well. In order to verify the dynamic sensing characteristic of the sensor, some experiments are performed. Experimental results show that the natural frequency of the sensor is 410 Hz, the working frequency range is 50~300Hz, and the average acceleration sensitivity is almost 133pm/g. In the range of working frequency, FBG wavelength has a good response to the vibration acceleration, and the linearity is better than 99%. Research indicates that the proposed FBG accelerometer can be used to measure the vibration acceleration of 50 ~ 300Hz with higher sensitivity, and the sensor has the merits of small size, light mass, high sensitivity, wide working band and easy fabrication, which makes it a good candidate for acceleration measurement.

A Fiber Laser Accelerometer Base on the Double Flexure Strips Structure

A Low-Frequency Vibration Acceleration Sensor Based on a Long-Period Fiber Grating and a Double-Clamped Beam

Fiber Optic Accelerometer Based On Long Period Fiber Grating Induced By Co2 Laser Pulses

Fiber-optic Micro Vibration Sensors Fabricated by a Femtosecond Laser

Accelerometer Based on Long Period Fiber Grating Induced by CO_2 Laser

Cascadable four-core fiber-Bragg gratings accelerometer for 2-dimension low-frequency vibration measurement

A novel fiber Bragg grating vibration sensor with double equal-strength cantilever beams

Minitype Optical Fiber Cantilever Acceleration Sensor

A Miniature Fiber-Optic Fabry-Perot Accelerometer Fabricated by Laser Micro-Machining

All-fiber Vibration Sensor Based on a Fabry–Perot Interferometer and a Microstructure Beam

A multi-cantilever beam low-frequency FBG acceleration sensor

A New Fiber Optic Accelerometer Based on Fiber Bragg Grating

Fiber Optic Accelerometer Based on Fiber-Mirror Interference Cavity

Theoretical Model and Design of Highly Sensitive Reflective Fiber Optic Fabry-Pérot Cavity Accelerometer Independent of Fiber Stiffness

A fiber Bragg grating acceleration sensor based on a circular flexure hinge structure for medium- and high-frequency vibration measurements

A Low-Frequency Fiber Bragg Grating Acceleration Sensor Based on Spring Support and Symmetric Compensation Structure with Flexible Hinges

Study on a Fiber Bragg Grating Accelerometer Based on Push-Pull Compliant Cylinders

Low-Frequency High-Resolution Fiber Fabry-Perot Interferometric Accelerometer Based on Double-Spring-Supported Oscillator

Broadband Flat Response High Sensitivity FBG Accelerometer Based on Multiresonance Structure

An FBG-Sensing Two-Dimensional Vibration Sensor Based on Multi-Axis Flexure Hinge

Performance study of a fiber Bragg grating accelerometer based on double-semicircle cantilever