Abstract:At present, China has entered the peak stage of large-scale maintenance, but repair materials for asphalt pavement potholes are subjected to problems, such as low construction efficiency and poor durability. Polyurethane modified epoxy acrylic resin was selected in this study to repair pavement potholes rapidly and improve durability further. Meanwhile, the cementing material and aggregate were formed into a mixture for rapid repair. A four-factor and four-level orthogonal experiment was designed, and the optimal mass ratio of each component of the cementing material (EPMY) was determined according to three indexes: tensile strength, elongation at break, and viscosity. The basic properties of the material were evaluated using viscosity, glass transition temperature, thermal stability, and elastic recovery rate tests. Finally, the mechanical properties of EPMY immersed in water, salt, acid, and oil solutions were tested under different environmental stimuli. Results showed that the optimal mass ratio of epoxy resin binder is 100% epoxy acrylic resin:15% diluent:30% toughening agent:60% curing agent:6% accelerant, with a tensile strength of 21.48 MPa and an elongation at break of 48.3% at ?10 °C. Elastic recovery rate is 51.3% at room temperature, glass transition temperature is ?13.6 °C, and mass residual rate of EPMY is 10.06% when the temperature rises to 500 °C. The mechanical properties of EPMY are maximally affected by the acidic solution; and the elongation at break, bending strength, and bending deformation are reduced by 11.63%, 7.52%, and 9.58%, respectively. Moreover, and the elongation at break of EPMY can be maintained above 89%. The cementing material can be used for the rapid repair of pavement potholes, thereby increasing the convenience of maintenance work and improving the maintenance level. Keywords: pavement materials, epoxy resin, polyurethane, material design, mechanical properties

Study on preparation technology of recycled aggregate rapid repair concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Preparation and properties of recycled rapid repair concrete

State-of-the-art report of recycled aggregate concrete and rapid repair concrete

Properties of Recycled Aggregate Concrete with Different Water Control Methods

Steel Corrosion and Corrosion-Induced Cracking in Reinforced Concrete with Carbonated Recycled Aggregate

Feasibility study of RAP aggregates in cement concrete pavements

Preparation and Performance Study of Rapid Repair Epoxy Concrete for Bridge Deck Pavement

Experimental study on strength and abrasion-resistance enhancement admixture

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Study on Preparation of High Early Strength Recycled Aggregate Concrete

Study on Strength Enhancement Factors of Cement-Stabilized Recycled Aggregate

Effects of Different Factors on the Performance of Recycled Aggregate Permeable Pavement Concrete

Study on the Performance and Application of High Performance Pavement Portland Cement Concrete

Optimization of the preparation process of Fair-Faced concrete incorporating recycled aggregates

Assessment of bonding, durability, and low-temperature performance of cement-based rapid patching materials for pavement repair

Experimental Study on the Mechanical Properties and Permeability of Cement-Stabilized Permeable Recycle Aggregate Materials

Preparation Technology and Experimental Study of Fast-Hardening UHPC Repair Material

PREPARATION AND PERFORMANCE OF CEMENTING MATERIALS FOR RAPID MAINTENANCE OF PAVEMENT POTHOLES

Study on Key Properties and Model Establishment of Innovative Recycled Aggregate Pervious Concrete

Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers