Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

Influence of rotor tooth shape on air-gap magnetic field in Homopolar Inductor Alternator

Analytical Calculation and Parameter Analysis of Air-Gap Magnetic Field Distribution in Permanent Magnet Synchronous Motor With Partition-Between-Poles Halbach Magnet

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

THE MODELING AND CALCULATING ON A NEW TYPE HYBRID CLAW-POLE ALTERNATOR

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Investigation of a Novel Hybrid Less-Rare-Earth Consequent-Pole Interior Permanent Magnet Machine with Asymmetric Rotor

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Influence of Design Parameters on the Field Current of the Tooth Harmonic Excitation System

Modeling of a Novel 12-Stator-Pole/10-Rotor-Tooth Doubly-Fed Flux-Switching Permanent Magnet Machine

3-D Analytical Model of Armature Reaction Field Calculation for Ironless Axial Flux Permanent Maanet Motor

Stator tooth shape optimization for double salient hybrid excitation generator based on asymmetric circuit analysis

Analytical Analysis of Quasi-Halbach Array Permanent-Magnet Motors Based on Field Separation Theory

FEM Analysis of the Inductance Parameters in a Large Hydro-Generator with Eccentricity

Analytical Model of Air‐Gap Magnetic Field for Eccentric Harmonic Magnetic Gear with Halbach Array

Research on a Novel Hybrid Axial Transverse Flux Permanent Magnet Motor with Compound Rotor

Influence of Salient Effect on Air-Gap Flux Density Distribution of Interior Permanent-Magnet Synchronous Machines