Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

Experimental study on seismic behaviors of UHTCC new beam-column joints with high axial compression

Cyclic-loading experiment for investigating seismic performance of beam-column connections with ultra high toughness cementitious composites

Experimental research on seismic behavior of new beam-column joints by using cementitious composites with ultrahigh toughness

RESEARCH ON CRACKING BEHAVIOR OF A NEW TYPE OF UHTCC FRAME BEAM-COLUMN JOINTS

Research on behavior of ultra-high toughness cementitious composites reinforced frame joints

Research on performance of new-type frame joints of ultra-high toughness cementitious composites

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Effect of UHTCC on seismic behavior of reinforced concrete frame joints

Four Point Bending Experimental Investigation on Reinforced Ultra High Toughness Cementitious Composite Beams

Improvement on flexural and cracking behavior of RC beam using ultra-high toughness cementitious composite Ⅱ: experimental study

Flexural Crack Control Performance of Existing Concrete Composite Beam Reinforced by Post-poured UHTCC

Experimental study on the flexural performance of concrete beam strengthened with ultra high toughness cementitious composites

Improvement of the flexural and cracking behavior of RC beams using ultra-high toughness cementitious composites(I):theoretical analysis

Theoretical Study of UHPCC Composite Column Behaviors under Axial Compression

Seismic Performance of T-shaped CFST Column to U-shaped Steel Composite Beam Joints

Experimental study on the seismic behavior of an innovative stepped beam-column joint

Analysis and experiment of reinforced ultra-high toughness cementitious composite flexural members

Uniaxial Tensile Experiments of Ultra-High Toughness Cementitious Composite

Experimental Study of the Shear Properties of Reinforced Ultra-High Toughness Cementitious Composite Beams

Experimental investigation of circular tubed RC beam-column joint with high longitudinal reinforcement ratio under axial compression

Calculation of Flexural Capacity for Crack-Control UHTCC/RC Composite Beams